World's first 'Smoking Carbon Cub'

[jim plaster]

I ran the hose inside of the void between the inner carbon panel and the outer fabric skin....they're are several areas along the stringer to secure the hose. I mounted my switch on the left side of the instrument panel where the throttle limitation placard was......I moved the throttle placard over beside the throttle. I haven't put a momentary " on" switch on the airplane as of yet....I simply turn the system on when needed and off when not. I suppose if one were to use the momentary switch...id put it on the stick below the ptt,or on /or near the throttle. Breakers are mounted to a small bracket....I used adel clamps to mount it to the diagonal tube behind the instrument panel where it's accessible. Haven't made it back out for pics yet..sorry