My turn coordinator gave out after 4 years and 340 hrs. It is a Falcon model TC02E-3A-2 and shows it to be the one with 8 degrees tilt. Anyone know if it has to be that or can it be the vertical model?
Jon
Sport Cub S2
My turn coordinator gave out after 4 years and 340 hrs. It is a Falcon model TC02E-3A-2 and shows it to be the one with 8 degrees tilt. Anyone know if it has to be that or can it be the vertical model?
Jon
Sport Cub S2
The panel is tilted more than 8 degrees. I don't think you can get a turn coordinator calibrated for more than 8 degrees though.
Pete D
Pete
This is the TC that came installed on the aircraft. Falcon lists the following models:
TC02E-3-2 0 degree panel
TC02E-3A-2 8 degree panel (This was the one installed on my Sport Cub).
If CC installed this one with the 8 degree panel, is that the model that must be used or what would happen if the other were used? Is this still what is being used in current production aircraft?
http://www.falcongauge.com/PDFs/catalog/turnandbank.pdf
Jon
Last edited by txcub; 12-07-2011 at 04:45 PM.