Results 1 to 7 of 7

Thread: Tip #1 Rivet Pulling Shim

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Jan 2010
    Location
    Yakima, Washington
    Posts
    157

    Default Tip #1 Rivet Pulling Shim

    One of our fellow Carbon Cub EX builders came up with this angled shim that allows the builder to use a hand or air operated rivet puller to pull the rivets that attach the ribs to the front and rear spars. Without an offset puller the rivets will not seat properly against the ribs. It is a good idea to use something like this shim to pull the rivets. The following diagram shows the basic dimensions that could be used, the only real important dimensions are the 12 degree angle and the hole placement. The hole placement will allow you to get into the necessary tight spots. Make sure that you deburr the edges so the ribs don’t get scratched. You could use about any material to make this shim. The rivet shaft will be pulled at a slight angle, but the rivet face will be seated flat against the rib.
    Rivet Puller Shim.jpg

    Thanks Tony
    Last edited by Mitch; 12-05-2011 at 08:40 AM.

  2. #2
    Member TheCubWorks's Avatar
    Join Date
    May 2010
    Location
    Lewistown Montana
    Posts
    32

    Default Re: Tip #1 Rivet Pulling Shim

    made one of these the other day WOW well worth the effort

    thank you

  3. #3
    Junior Member chrism's Avatar
    Join Date
    Dec 2011
    Location
    Grand Rapids, MI
    Posts
    25

    Default Re: Tip #1 Rivet Pulling Shim

    Genius, thanks guys, I left the airport tonight wondering what would be a better way of getting those rivets in.

  4. #4
    Junior Member
    Join Date
    Apr 2021
    Location
    Solway, MN
    Posts
    9

    Default Re: Tip #1 Rivet Pulling Shim

    Anyone not using one these to share? Wont be needed until June.

  5. #5
    Senior Member
    Join Date
    Jul 2015
    Location
    Broken Arrow, OK
    Posts
    841

    Default Re: Tip #1 Rivet Pulling Shim

    Quote Originally Posted by wluggar View Post
    Anyone not using one these to share? Wont be needed until June.

    Will.

    Notice in this post how to grind the tip of the rivet gun at an angle. It will do the same thing and much easier. There are only like 4 rivets in the build that you will need this.

    http://forum.cubcrafters.com/showthr...ll=1#post21588

    2B7C274C-F158-4819-8259-D63455F49551.jpg
    Dave Embry
    "You only live once.......but if you do it right.........once is enough."..

  6. #6
    Junior Member
    Join Date
    Apr 2021
    Location
    Solway, MN
    Posts
    9

    Default Re: Tip #1 Rivet Pulling Shim

    Perfect easy enough. Thank you.


    Quote Originally Posted by Daveembry View Post
    Will.

    Notice in this post how to grind the tip of the rivet gun at an angle. It will do the same thing and much easier. There are only like 4 rivets in the build that you will need this.

    http://forum.cubcrafters.com/showthr...ll=1#post21588

    2B7C274C-F158-4819-8259-D63455F49551.jpg

  7. #7
    Senior Member ceslaw's Avatar
    Join Date
    Sep 2013
    Location
    Carterville, IL
    Posts
    589

    Default Re: Tip #1 Rivet Pulling Shim

    Quote Originally Posted by wluggar View Post
    Anyone not using one these to share? Wont be needed until June.
    For a mere $20 you can have one delivered to your door in a couple of days. Cleveland Aircraft Tools. Just posted on this very topic. Here is a link for a bit more info and a full size color picture.

    http://forum.cubcrafters.com/showthr...ll=1#post26878

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •