Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Potential FATAL ROLL due to Roll Servo bracket install error

  1. #11
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: Potential FATAL ROLL due to Roll Servo bracket install error

    Quote Originally Posted by jjoffe@me.com View Post
    Andy - does it really make a difference with stops on the torque tub roll side? - what could be an issue - I left it off on purpose thinking the stops on the torque tube rotation would suffice??
    Yes, there is a reason the Garmin includes that secondary stop.
    It shouldn't hit the stop on the servo in normal operations but the stop should be set close, as a secondary backup. Garmin's installation instructions are clear on this.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  2. #12
    Member
    Join Date
    Jun 2022
    Location
    Nantucket MA
    Posts
    30

    Default Re: Potential FATAL ROLL due to Roll Servo bracket install error

    Quote Originally Posted by Pete D View Post
    Yes, there is a reason the Garmin includes that secondary stop.
    It shouldn't hit the stop on the servo in normal operations but the stop should be set close, as a secondary backup. Garmin's installation instructions are clear on this.
    Thanks for all the input - I added the stop bracket per Garmin’s instructions - took almost 2 hours to put the two screws in.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •