Results 1 to 6 of 6

Thread: Going from 1.5” to 1.75” calipers

  1. #1
    Junior Member
    Join Date
    Oct 2023
    Location
    Aiken, SC
    Posts
    15

    Default Going from 1.5” to 1.75” calipers

    I have an EX-2 with Grove 33-5M calipers which are dual 1.5” pistons. Does anyone know the caliper number I would need to go to 1.75 brakes and if they will bolt on with no other modifications or do I need to buy a kit? Thanks…

  2. #2
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: Going from 1.5” to 1.75” calipers

    The 1.25 and 1.5 calipers have the same torque plate (SP45004-007)
    The 1.75 caliper takes a SP45009003 torque plate

    So in order to change from the 1.5 to the 1.75, yes, you would need to change the torque plates.

    The 1.75 caliper p/n is SP45009-002

    parts@cubcrafters.com can provide current pricing and enter an order for you
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  3. #3
    Junior Member
    Join Date
    Oct 2023
    Location
    Aiken, SC
    Posts
    15

    Default Re: Going from 1.5” to 1.75” calipers

    Thanks Pete,
    Is there a thicker rotor I should order as well with the 1.75 calipers? I thought I read that when going from the 65 series to the 66 series. If so, do you have that part number and I will order everything at the same time.

  4. #4
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: Going from 1.5” to 1.75” calipers

    The EX2 will use the same wheel and rotor assembly for any of the Grove brake caliper options (1.25, 1.5 and 1.75)
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  5. #5
    Senior Member Andy's Avatar
    Join Date
    Dec 2019
    Location
    Glendale, AZ
    Posts
    793

    Default Re: Going from 1.5” to 1.75” calipers


  6. #6
    Member
    Join Date
    Oct 2012
    Location
    swanton vt
    Posts
    49

    Default Re: Going from 1.5” to 1.75” calipers

    I have an EX and did go to 1.75. Found that I needed a new rotor as mine did not have joggle. Cubcrafters was not aware of that. believe it was for the earlier EX. I would call Grove to double check. They are very knowledgeable.

    Correct, the earlier wheel kits would need an alternative rotor for 1.75 brakes. The later and current wheels include the disk with the joggle compatible with all the caliper options.
    Last edited by Pete D; 03-14-2024 at 10:10 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •