CK-KM301 Wing Manual EX2/EX3 Rev C released
Rev C of the wing manual has been uploaded to both the EX2 and EX3 Dropbox manual folders.
There are still more updates to come soon and manual notes to address in this manual going forward but here is a highlights list of the changes to revision C
Clarified hole placement and edge distance requirements on page 37.1 & 37.3
Page 20.5 Corrected p/n of tank strap felt (was RM4906-001 foam) to RM1002-002
Clarified figure W102 is EX2 specific (W92 is the EX3 specific version of this figure)
Page 21.4 added "Add RM1070-001 (Friction Tape) As required to prevent chafing where each of the drag wires cross each other."
Page 3.3 Updated methacrylate gun operation notes to reflect current type of gun shipped in the kits.
Pages 26.1, 60.3 and 60.4 added reminders to lightly lube the pully hardware on installation.
Deleted Pages 43.1 through 43.5, and removed section from table of contents (G3X GSU 25 data for production installation N/A to kits)
Reply With Quote