Results 1 to 10 of 10

Thread: Cherry max H781-456 assistance needed

  1. #1
    Junior Member
    Join Date
    Sep 2021
    Location
    Miami, FL
    Posts
    14

    Default Cherry max H781-456 assistance needed

    Is anyone using the cherry max pneumatic gun with the H781-456 ? I purchased one from ebay and have been able to pull cherry max rivets. Unfortunately, at least on my unit it doesn’t seem to pull the CCPS-04-02. Although, CC photos show this has been used to pull these rivets. Has this happen to other users? Any suggestions on how to solve this issue?

    Thanks,

    Jaime




    Attached Images Attached Images

  2. #2
    Junior Member
    Join Date
    Oct 2021
    Location
    DELAND, FL
    Posts
    4

    Default Re: Cherry max H781-456 assistance needed

    You need to adjust the tool. There are lots of "how to" videos on youtube.

  3. #3
    Junior Member
    Join Date
    Sep 2021
    Location
    Miami, FL
    Posts
    14

    Default Re: Cherry max H781-456 assistance needed

    Quote Originally Posted by Swiftpilot View Post
    You need to adjust the tool. There are lots of "how to" videos on youtube.
    thanks for the suggestion. I have looked on youtube and have not found any reference to adjust the tool. Please send a couple of links as others have had similar problems. Thanks and Happy New Year!

    Jaime

  4. #4
    Junior Member
    Join Date
    Jul 2021
    Location
    Albuquerque, NM
    Posts
    15

    Default Re: Cherry max H781-456 assistance needed

    Quote Originally Posted by Sntry View Post
    thanks for the suggestion. I have looked on youtube and have not found any reference to adjust the tool. Please send a couple of links as others have had similar problems. Thanks and Happy New Year!

    Jaime
    I actually think it is a different offset head for the regular pull rivets vice the cherrymax. Here is a link to gage built pullers and you can see they have different offset model numbers for cherrymax and other rivets. I have not confirmed with Cubcrafters if that is a different head but I think most builders are still pulling the ribs with a hand puller even if they have the cherrymax tool.

    https://gagebilt.com/pneudraulic_too...neudraulic.php

  5. #5
    Junior Member
    Join Date
    Oct 2019
    Location
    Fort Collins
    Posts
    7

    Default Re: Cherry max H781-456 assistance needed

    I have the exact same set up and it will only pull the Cherry rivets.

  6. #6
    Junior Member
    Join Date
    Sep 2021
    Location
    Miami, FL
    Posts
    14

    Default Re: Cherry max H781-456 assistance needed

    Quote Originally Posted by Kramer View Post
    I have the exact same set up and it will only pull the Cherry rivets.
    ok, thanks. It seems CC and in the build photos, they are using a different attachment. Unless someone at CC has any insight for us….
    Last edited by Sntry; 01-02-2023 at 09:40 PM.

  7. #7
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: Cherry max H781-456 assistance needed

    I have an inquiry in with our wing build crew who uses these tools every day for their feedback and will report back when I get a reply.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  8. #8
    Junior Member
    Join Date
    Sep 2021
    Location
    Miami, FL
    Posts
    14

    Default Re: Cherry max H781-456 assistance needed

    Quote Originally Posted by Pete D View Post
    I have an inquiry in with our wing build crew who uses these tools every day for their feedback and will report back when I get a reply.
    hi Pete

    have you received any feedback from the builder crews? Thanks, Jaime

  9. #9
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: Cherry max H781-456 assistance needed

    From our wing build shop, There are different head unit p/ns for the rivet puller H781-456 and different head options are optimized for different types of rivets, this is the info they provided, I hope you find it useful;


    The top picture style rivet gun will pull both style rivets. Cherry max and pop rivets. Example - (Head unit numbers off a GAGE BILT rivet gun - 4N-751A-43OS,13536-A,9012-2)
    The second picture of that style rivet gun will only pull Cherry max rivets. Example - (Head unit numbers of a GAGE BILT rivet gun - 456MAX-704-43OS, 76309-T, 1149-2)
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  10. #10
    Junior Member
    Join Date
    Sep 2021
    Location
    Miami, FL
    Posts
    14

    Default Re: Cherry max H781-456 assistance needed

    Thanks for the information….

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •