Results 1 to 4 of 4

Thread: top baffle cover and worn baffle seals

  1. #1
    Member
    Join Date
    Jul 2019
    Location
    Boston, MA
    Posts
    31

    Default top baffle cover and worn baffle seals

    I was wondering what folks have been doing to address baffle seals that have worn and starting to disintegrate. It appears when the covers were produced the rubber seals have been sandwiched between layers of the carbon fiber cover. Mine are starting to come apart and curious what others have done?

    Screen Shot 2022-03-08 at 9.38.01 PM.png

  2. #2
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: top baffle cover and worn baffle seals

    The very early ones had the baffle seal around the front opening laid up in the carbon fiber plenum. When the cowl and plenum was updated in mid 2012 with the larger openings the baffle seal was changed to be clamped to the outside of the plenum and lower forward baffles.

    You may be able to use large head aluminum pop rivets and attach new baffle seal to the outside of the plenum and baffle? Not sure if that would fit, but it would update it to be similar to the newer style even though there is no joggle/flat area for the clamps.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  3. #3
    Member
    Join Date
    Jul 2019
    Location
    Boston, MA
    Posts
    31

    Default Re: top baffle cover and worn baffle seals

    Quote Originally Posted by Pete D View Post
    The very early ones had the baffle seal around the front opening laid up in the carbon fiber plenum. When the cowl and plenum was updated in mid 2012 with the larger openings the baffle seal was changed to be clamped to the outside of the plenum and lower forward baffles.

    You may be able to use large head aluminum pop rivets and attach new baffle seal to the outside of the plenum and baffle? Not sure if that would fit, but it would update it to be similar to the newer style even though there is no joggle/flat area for the clamps.
    Thank you Pete. Do you have pictures of the baffle seal on newer carbon cubs?

  4. #4
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: top baffle cover and worn baffle seals

    The diagram you have in your first post shows the baffle seals and clamps that attach where your red arrow is. Here is a photo form the side that shows the clamp and seal in place.

    Baffle seal.png
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •