Results 1 to 5 of 5

Thread: Certified XCub 215hp rudder cable noise and friction

  1. #1
    Junior Member
    Join Date
    Jul 2020
    Location
    Los Angeles, CA
    Posts
    2

    Default Certified XCub 215hp rudder cable noise and friction

    Hi everyone,

    We have been flying our new XCub now for almost a year and have noticed an unusual noise and friction when we are taxing the plane at slow speeds. When we have full rudder deflection from left to right, or right to left, we hear a clicking noise and feel friction as though the rudder cable or spring is getting caught on something.

    Has anyone else noticed this?

    Thank you,
    Tim

  2. #2
    Senior Member
    Join Date
    Mar 2016
    Location
    Idaho
    Posts
    393

    Default Re: Certified XCub 215hp rudder cable noise and friction

    I'm not familiar with the XCub, but it might be the tailwheel unlocking. Just a guess.
    Dan Arnold
    KEUL

  3. #3
    Senior Member Andy's Avatar
    Join Date
    Dec 2019
    Location
    Glendale, AZ
    Posts
    793

    Default Re: Certified XCub 215hp rudder cable noise and friction

    Quote Originally Posted by thalimi View Post
    We have been flying our new XCub now for almost a year and have noticed an unusual noise and friction when we are taxing the plane at slow speeds. When we have full rudder deflection from left to right, or right to left, we hear a clicking noise and feel friction as though the rudder cable or spring is getting caught on something.
    I had the same issue on the first few flights in my FX-3. I squawked it and CC greased the tail wheel. That made it better and, after a bit of use, the "catching" went away. Should be easy to check if it is tail wheel or cables by raising and supporting the tail and operating pedals stop to stop.

  4. #4
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: Certified XCub 215hp rudder cable noise and friction

    Hi Tim,

    Sometimes the XCub brake line can make a little noise where it passes through the grommet in the floor from the master cylinders on the front side of the aft rudder pedals. You can try resting your hand on the hose while moving the rudder pedals one at a time, see if you can feel/change the sound. (goes without saying, try this while parked and engine off)

    The other possible place is the plastic fairleads that support the cable in several places can move slightly when the cable moves through them. There are several down the cable as it routes pretty close to a straight line down the fuselage. The aft avionics bay cover can be easily removed to take a look at the aft 1/3 of the cable length. one technique to quite the fairleads is to put a small dab of silicone between the fairlead and the tube it goes in, will quiet down the noise they make. If that is all it is, not a safety issue though.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  5. #5
    Junior Member
    Join Date
    Jul 2020
    Location
    Los Angeles, CA
    Posts
    2

    Default Re: Certified XCub 215hp rudder cable noise and friction

    Thank you all for the replies, I will try the suggestions and report back if anything helps resolve the issue.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •