Results 1 to 5 of 5

Thread: Spray gun nozzle for Poly-Brush and Poly-Spray?

  1. #1
    Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    92

    Default Spray gun nozzle for Poly-Brush and Poly-Spray?

    Good morning, everyone!


    Do you have any advice for me about spray gun nozzles for Poly-Brush and Poly-Spray?


    The values I found range from 1.4 (which seems to me to be a little) to 2.4 (which seems to me to be a lot).


    What do you think?

    Rgrds,

    Yves

  2. #2
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    725

    Default Re: Spray gun nozzle for Poly-Brush and Poly-Spray?

    I checked my notes and found I set my gun at 1.7. This is with an HVLP system.
    Flying Carbon Cub EX #11 since 2011

  3. #3
    Senior Member
    Join Date
    Jul 2015
    Location
    Broken Arrow, OK
    Posts
    724

    Default Re: Spray gun nozzle for Poly-Brush and Poly-Spray?

    https://forum.cubcrafters.com/showth...ll=1#post21942

    Hi Yvette,

    Here’s some info I wrote up in it. I actually called them at the polybrush factory and they said to use a 2.4 tip. That puts out a lot but that’s ok. It dries in seconds so doesn’t run much at all. You want it very wet as it goes down. It should be “shiny” if you have used enough. I had a 2.4 tip gun screw up on me once right in the middle of spraying a wing and I used my 1.3 finish gun. It worked but you had to go really slow to get enough out fast enough…..but it worked.

    Quote Originally Posted by PBY Catalina View Post
    Good morning, everyone!


    Do you have any advice for me about spray gun nozzles for Poly-Brush and Poly-Spray?


    The values I found range from 1.4 (which seems to me to be a little) to 2.4 (which seems to me to be a lot).


    What do you think?

    Rgrds,

    Yves
    Dave Embry
    "You only live once.......but if you do it right.........once is enough."..

  4. #4
    Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    92

    Default Re: Spray gun nozzle for Poly-Brush and Poly-Spray?

    Thanks guys,

    That was for Poly-Brush. Is it the same for Poly-Spray ? Between 1.7 and 2.4 ?

    Yves

    ... like Yves Montand or Yves Saint Laurent !!!
    ( not Yvette ! )

  5. #5
    Senior Member
    Join Date
    Jul 2015
    Location
    Broken Arrow, OK
    Posts
    724

    Default Re: Spray gun nozzle for Poly-Brush and Poly-Spray?

    Yves….yes. Both uses the lager nozzle.

    Quote Originally Posted by PBY Catalina View Post
    Thanks guys,

    That was for Poly-Brush. Is it the same for Poly-Spray ? Between 1.7 and 2.4 ?

    Yves

    ... like Yves Montand or Yves Saint Laurent !!!
    ( not Yvette ! )
    Dave Embry
    "You only live once.......but if you do it right.........once is enough."..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •