Results 1 to 10 of 10

Thread: Removing trim knob on stick.

  1. #1
    Junior Member
    Join Date
    Jul 2021
    Location
    Hot Springs Arkansas
    Posts
    8

    Default Removing trim knob on stick.

    How do you remove the top silver knob with the elevator trim switch on the control sticks?
    I have a new grip I’m installing.

  2. #2
    Senior Member
    Join Date
    Mar 2016
    Location
    Idaho
    Posts
    386

    Default Re: Removing trim knob on stick.

    Can't say for sure, but have you tried to gently pry it off? I imagine it is just a machine type fit, not glued, as one might need to get in there to fix things.
    Dan Arnold
    KEUL

  3. #3
    Junior Member
    Join Date
    Jul 2021
    Location
    Hot Springs Arkansas
    Posts
    8

    Default Re: Removing trim knob on stick.

    Yes, it’s tight. I don’t want to scratch or damage it.

  4. #4
    Senior Member
    Join Date
    Mar 2016
    Location
    Idaho
    Posts
    386

    Default Re: Removing trim knob on stick.

    Yup, totally understand.
    Dan Arnold
    KEUL

  5. #5
    Senior Member Andy's Avatar
    Join Date
    Dec 2019
    Location
    Glendale, AZ
    Posts
    714

    Default Re: Removing trim knob on stick.

    I looked at my FX-3 rear stick this morning. There is a plug in the forward face well below the trim switch. Does this conceal a retaining set screw? (FX-3 has multi-switch grip on front stick and simple simple trim only insert on rear stick)

  6. #6
    Senior Member Rick Bosshardt's Avatar
    Join Date
    Oct 2012
    Location
    Mesa, AZ
    Posts
    622

    Default Re: Removing trim knob on stick.

    Andy, I believe that plug on the front of the back stick is there in case a button is to be installed, as an example, moving the PTT switch on the wing root down to the stick.


    Rick Bosshardt
    SunCountry Cubs
    CubCrafters Dealer for AZ/NM/UT/CO/southern WY
    www.suncountrycubs.com

  7. #7
    Junior Member
    Join Date
    Jul 2022
    Location
    Morgan hill, ca
    Posts
    13

    Default Re: Removing trim knob on stick.

    Where you able to remove top of stick for access to trim switch, ? If so how did it go? mine is very tight, maybe lock title in,

  8. #8
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: Removing trim knob on stick.

    The aluminum top cap is pressed in with an interference fit. The trim switch is glued into the aluminum top cap. If you are replacing the trim switch, the top cap is also typically replaced. It can be removed from the stick and the stick re-used but in order to grip the aluminum top cap it usually damages the aluminum cap.

    The earlier switch with the oval profile trim switch (when looking down from the top) is no longer available, the current trim switch has a rectangular shape (corners are square) when looking at it from the top and uses a different aluminum top cap p/n.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  9. #9
    Junior Member Craig R's Avatar
    Join Date
    Jan 2019
    Location
    Orlando Apopka X04
    Posts
    9

    Default Re: Removing trim knob on stick.

    Has anyone swapped the PASSENGER AP DISCONNECT with the PASSENGER PTT?

  10. #10
    Junior Member Craig R's Avatar
    Join Date
    Jan 2019
    Location
    Orlando Apopka X04
    Posts
    9

    Default Re: Removing trim knob on stick.

    Has anyone swapped the PASSENGER AP DISCONNECT with the PASSENGER PTT?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •