FX-3 EX-3 spinner

[Andy]

Would someone who has the spinner off (perhaps still building) please tell me the Hartzell part numbers for the composite spinner dome and spinner back plate. (also any other part numbers in the assembly if there are any)

Not needed for myself but for someone who intends to put a Trailblazer prop on a PA-18.

Thanks

[PropWash_ID]

Spinner part #: 106039
Backplate part #: 106348P

[Andy]

Spinner part #: 106039
Backplate part #: 106348P

Thanks! I find 106039 listed in the Hartzell spinner manual as a composite dome part number. I don't find 106348P in the same reference. Any chance you could post photos of the part number labels so I know I'm passing on good info.

edited - I do find 106348P listed in the price list - https://hartzellprop.com/wp-content/...Price-List.pdf

Thanks again for the help.

[PropWash_ID]

Thanks! I find 106039 listed in the Hartzell spinner manual as a composite dome part number. I don't find 106348P in the same reference. Any chance you could post photos of the part number labels so I know I'm passing on good info.

edited - I do find 106348P listed in the price list - https://hartzellprop.com/wp-content/...Price-List.pdf

Thanks again for the help.

Part # 106040 is also written on the plate as "spinner Assy." I assume this is for both pieces (composite dome and backplate). It is on the price list link you sent as well. 100% sure these #'s are correct. About 2 months out from completing my EX3!

[Andy]

Part # 106040 is also written on the plate as "spinner Assy." I assume this is for both pieces (composite dome and backplate). It is on the price list link you sent as well. 100% sure these #'s are correct. About 2 months out from completing my EX3!

Thanks for your help. I hope airworthiness inspection and first flight are trouble free.