Results 1 to 2 of 2

Thread: Inspection Hole Cutouts

  1. #1
    Senior Member jmorrical's Avatar
    Join Date
    Aug 2014
    Location
    The Woodlands, TX
    Posts
    205

    Default Inspection Hole Cutouts

    This paragraph in the EX(1) Finish Manual says I should keep inspection hole cutouts in a safe place. Wondering why?

    SECTION 53 INSPECTION HOLES

    Before we install the jury struts, it is prudent to cut the inspection holes in the bottom of the wings.
    There are 3 holes on the right hand wing and 4 holes in the left hand wing. Try to cut the holes so that you remove a circular piece of material. Put the material that is removed into a zip lock bag and store it in a safe place. See the photographs.



    Screen Shot 2021-08-05 at 8.35.42 AM.png
    Jim Morrical

  2. #2
    Senior Member Andy's Avatar
    Join Date
    Dec 2019
    Location
    Glendale, AZ
    Posts
    793

    Default Re: Inspection Hole Cutouts

    Quote Originally Posted by jmorrical View Post
    This paragraph in the EX(1) Finish Manual says I should keep inspection hole cutouts in a safe place. Wondering why?

    Because they can be used as perfect color match repair patches.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •