Results 1 to 3 of 3

Thread: Overheating solution to Titan. CC 340 ?

  1. #1
    Junior Member
    Join Date
    Feb 2020
    Location
    HERVEY Bay ,QUEENSLAND Australia
    Posts
    12

    Default Overheating solution to Titan. CC 340 ?

    Hi all,
    American Legend has used the larger MA-5 carburettor to cool its high compression TITAN CC 340 engine used in Carbon cubs by increasing fuel flow from 13.0 -14.x. To 18 gph

    Has anyone succeeded in installing this in Carbon cubs or is it just too big ?

    See article below from supercub.org guru Steve Pierce who looks after both Carbon cubs and American Legends
    03-09-2020, 07:00 AM #34
    Steve Pierce Steve Pierce is offline

    Steve Pierce's Avatar Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    20,699
    Post Thanks / Like
    I have been maintaining a few Titan 340s. ECI spec'd the engine MA4-5 carburetor but it wouldn't fit in the Carbon Cub cowling so Cub Crafters used the MA4SPA 10-3678-32 which is much smaller. There have been several service documents put out by CC to make them run cool. Changing the flywheel for the Lightspeed ignition from 25 degrees to 22 degrees works well. Legend figured it out and went with the MA-5 and no issue.

    Cub Crafters is using the CC363 in the FX3 which is fuel injected and has a constant speed prop. I believe Legend is using a version of the 360 in their MOAC (Mother of All Cubs).


    Sent from my iPad using Tapatalk

  2. #2
    Senior Member Andy's Avatar
    Join Date
    Dec 2019
    Location
    Glendale, AZ
    Posts
    714

    Default Re: Overheating solution to Titan. CC 340 ?

    This may be a better link to the referenced post -

    https://tinyurl.com/56tudrwc

    What's to stop an experimental owner changing jet sizes to get the desired full power mixture? Never done it on an aircraft carb but quite often did "plug chops" and main jet changes on motor cycles when I was much younger.
    Last edited by Andy; 05-02-2021 at 05:21 AM.

  3. #3
    Senior Member Andy's Avatar
    Join Date
    Dec 2019
    Location
    Glendale, AZ
    Posts
    714

    Default Re: Overheating solution to Titan. CC 340 ?

    Some RV guys are drilling jets not just swapping them -

    https://vansairforce.net/community/s...ad.php?t=20875

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •