Results 1 to 7 of 7

Thread: Wiring chart and video

  1. #1
    Senior Member
    Join Date
    Jul 2015
    Location
    Broken Arrow, OK
    Posts
    841

    Default Wiring chart and video

    WIRING VIDEOS AND CHART

    I posted these 2 videos and wiring chart in my thread on Building the EX3 - Tips & Hints under the wiring posts but thought it might be handy for others interested in the wiring. http://forum.cubcrafters.com/showthr...light=ex3+tips

    The Wiring Chart is an attachment here at the bottom that you can download. It's an Excel Spreadsheet that is simple to use by just telling you where each wire (by number) goes.

    Video 1 is just over an hour long and shows getting the wiring all in place:

    https://www.youtube.com/watch?v=uIla88WwLp0&t=18s

    Video #2 is almost 30 minutes and shows the completed wiring all bundled and complete:

    https://www.youtube.com/watch?v=1quxr-BHTQQ&t=13s
    Attached Files Attached Files
    Dave Embry
    "You only live once.......but if you do it right.........once is enough."..

  2. #2
    Senior Member ceslaw's Avatar
    Join Date
    Sep 2013
    Location
    Carterville, IL
    Posts
    593

    Default Re: Wiring chart and video

    I am amazed how much I have forgotten since wiring the EX seven years ago. Just watched your video. It was a great refresher course. Thanks for posting.

  3. #3
    Senior Member
    Join Date
    Jul 2014
    Location
    NZAR
    Posts
    103

    Default Re: Wiring chart and video

    I am working through the Part 91 Maintenance Manual wiring schematics from CubCrafters, in particular the EX2 Ignition System circuit. In the middle of the page 7, there is a component called a Radio Frequency Noise Filter Assembly (SC56080-003) which is required to prevent interference in the LED ignition monitoring lights. SI00024 refers.
    https://cubcrafters.com/c/wp-content...024_Rev_NC.pdf

    I do not have that component, but it is apparently a small rubber shielded capacitor, but has no voltage or capacitance rating attached to the schematic to define its specification for installation. Does anyone have this information, such that I can obtain the correct capacitor locally?


    Quote Originally Posted by Daveembry View Post
    WIRING VIDEOS AND CHART

    I posted these 2 videos and wiring chart in my thread on Building the EX3 - Tips & Hints under the wiring posts but thought it might be handy for others interested in the wiring. http://forum.cubcrafters.com/showthr...light=ex3+tips

    The Wiring Chart is an attachment here at the bottom that you can download. It's an Excel Spreadsheet that is simple to use by just telling you where each wire (by number) goes.

    Video 1 is just over an hour long and shows getting the wiring all in place:

    https://www.youtube.com/watch?v=uIla88WwLp0&t=18s

    Video #2 is almost 30 minutes and shows the completed wiring all bundled and complete:

    https://www.youtube.com/watch?v=1quxr-BHTQQ&t=13s

  4. #4
    Junior Member
    Join Date
    Mar 2021
    Location
    Coolidge, AZ
    Posts
    6

    Default Re: Wiring chart and video

    I was told that is a 470pF 50V capacitor. I have not seen that service bulletin and I don't believe I have that overvoltage module (im still building). I was referencing page 4 of the executive glass manual when I was given the information for the above capacitor.

  5. #5
    Senior Member
    Join Date
    Jul 2014
    Location
    NZAR
    Posts
    103

    Default Re: Wiring chart and video

    Thank you for that information, maybe the capacitor is only required for the Executive Glass option, I would have thought the capacitor would be aligned to that panel choice. I do not have the executive glass panel and do not have the Radio Noise filter, so perhaps that explains my lack of that component.

    Quote Originally Posted by jump4way View Post
    I was told that is a 470pF 50V capacitor. I have not seen that service bulletin and I don't believe I have that overvoltage module (im still building). I was referencing page 4 of the executive glass manual when I was given the information for the above capacitor.

  6. #6
    Junior Member
    Join Date
    Mar 2021
    Location
    Coolidge, AZ
    Posts
    6

    Default Re: Wiring chart and video

    It’s my understanding that it is to limit noise from the LEDs. If you are using those then I think you would need the capacitor.

  7. #7
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: Wiring chart and video

    The capacitor that is part of the SC56080-003 assembly is used to prevent the LED from illuminating when transmitting on the radio in certain frequency ranges, not to filter noise from the LED to the radio. It was found that transmitting on certain frequencies on the COM radio would illuminate the LEDs dimly and this SC56080 was added to filter that out.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •