Dan, the only time we've experienced this is when the upper cabane bolt was not torqued to proper specs or incorrect spacer width was used. Please give us a call at 704-496-9022 Ext. 2. We'd be glad to send you new bushings and supply you with proper torque specs for your application.

Thanks for the response. That follows with what I assumed was probably going on. When I remove th skis I値l get a good measurement on the width of the cabane. And it could be the pocket in mine will accept an on-center bushing. If so I値l just make one from some 416 SS I have. That would keep it from pivoting around and also tighten the wheel camber. I have the heim joints threaded up as far as they値l go now.