Results 1 to 2 of 2

Thread: Window Liner -Two outer fixings

  1. #1
    Senior Member
    Join Date
    Jul 2014
    Location
    NZAR
    Posts
    102

    Default Window Liner -Two outer fixings

    In the Finish manual Section 58 Page 200 , there is an understandable caution not to drill into the boot cowl to apply the two peripheral fixings on each side of the window liner.
    However, there is little other instructions on the installation of the two outer window liner fixings.
    I recognise the need to not drill into the window pillar wiring or fuel lines. Is this just a case of having a back plate to prevent this, or is there some other fixing installation to finally apply?
    Are Trix nuts still the final intention for these two outer holes on the window liner?

  2. #2
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: Window Liner -Two outer fixings

    The last couple holes on either side are addressed a few pages later, page 203 at the bottom. They get a shorter screw to ensure the screws don't hit anything on the back side.

    EX2 Finish manual pg 203.pdf
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •