Page 3 of 11 FirstFirst 1234567891011 LastLast
Results 21 to 30 of 105

Thread: Building an EX2 in ITALY.

  1. #21
    Senior Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    176

    Default Re: Building an EX2 in ITALY.

    I found many discussions about the critical phase of squaring the wings. I adopted the procedure described by Dave & Mitch. Just so I know where I stand with the side adjustments, before I made a pre-squaring by literally jigging the spares, with a little scale that I attached on the sawhorse, alongside the secondary spare.

    IMG_4656_Fotor - copie.jpg

    IMG_4676 - copie.jpg

    IMG_4681_Fotor - copie.jpg

  2. #22
    Senior Member Rick Bosshardt's Avatar
    Join Date
    Oct 2012
    Location
    Mesa, AZ
    Posts
    624

    Default Re: Building an EX2 in ITALY.

    Super nice workshop, Yves!


    Rick Bosshardt
    SunCountry Cubs
    CubCrafters Dealer for AZ/NM/UT/CO/southern WY
    www.suncountrycubs.com

  3. #23
    Senior Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    176

    Default Re: Building an EX2 in ITALY.

    Quote Originally Posted by Rick Bosshardt View Post
    Super nice workshop, Yves!
    if you like the workshop you would love the pilot's bar I have build beside! ...

  4. #24
    Senior Member Rick Bosshardt's Avatar
    Join Date
    Oct 2012
    Location
    Mesa, AZ
    Posts
    624

    Default Re: Building an EX2 in ITALY.

    Oh yes!
    Ill be visiting my son and daughter in law in three weeks in Zurich... you live near Milan, right? Is the border open via train? Maybe Ill come visit!


    Rick Bosshardt
    SunCountry Cubs
    CubCrafters Dealer for AZ/NM/UT/CO/southern WY
    www.suncountrycubs.com

  5. #25
    Senior Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    176

    Default Re: Building an EX2 in ITALY.

    Quote Originally Posted by Rick Bosshardt View Post
    Oh yes!
    Ill be visiting my son and daughter in law in three weeks in Zurich... you live near Milan, right? Is the border open via train? Maybe Ill come visit!
    You are of course very welcome !

    Yes te border is open.
    From tomorrow at 24H, no curfew anymore.
    But their are still many other conditions to fulfil to be able to cross the borders freely.
    It change several time per week, so I'll check that with you.

    Details via PM !
    Last edited by PBY Catalina; 04-05-2021 at 02:45 PM.

  6. #26
    Senior Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    176

    Default Re: Building an EX2 in ITALY.

    A little update on my build.

    So far so good. I didn’t have much difficulties. Most of the time, when I have some, they’re the same one’s you guys all have. So, I find easily answers here on the forum.

    The control of the aileron was perfect from the first test.
    1.jpg

  7. #27
    Senior Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    176

    Default Re: Building an EX2 in ITALY.

    The adjustment of the rear spar reinforcement and all the cap strips is a tedious work that requires a lot of patience to properly pre-position them, but ultimately it does not pose any major difficulty and it is even the most fun work.

    2.jpg

    3.jpg

    4.jpg

  8. #28
    Senior Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    176

    Default Re: Building an EX2 in ITALY.

    I use a lot of these mini-clamps, like here to adjust the landing light, or here to control the perpendicularity.
    Very useful!

    5.jpg

    6.jpg

    6B.jpg

  9. #29
    Senior Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    176

    Default Re: Building an EX2 in ITALY.

    I built a set of leading-edge clamps. They are essential to work well on leading edge skins. They will be available after completion of my right wing, for any other kit construction here in Europe.

    7b.jpg

    8.jpg

    9.jpg

    The most difficult was the adjustment around the landing light. I had to double the rivets to arrive at an acceptable result at this place.

    10.jpg
    Attached Images Attached Images
    • File Type: jpg 7.jpg (104.6 KB, 67 views)
    Last edited by PBY Catalina; 05-06-2021 at 03:04 AM.

  10. #30
    Senior Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    176

    Default Re: Building an EX2 in ITALY.

    The installation of the fuel tanks was one of the most difficult steps, until I found the right method. With the pliers as Dave explained, I couldn’t do anything. It is by using longer bolts, which I tight and secure with wire-brake and then replace with the right bolts, that I finally got there.

    11.jpg

    12.jpg
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •