Results 1 to 8 of 8

Thread: Extra Leading edge skin?

  1. #1
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Extra Leading edge skin?

    Wondering if any kit builders might have an extra leading edge skin that was damaged or a spare for some reason? I have the landing light in my left wing and would like to remove it and cover the hole with a section of a skin.

    My plan is to put a small LED Light bar somewhere on the lift strut or Gear. I don’t like the light the way it is in the leading edge.
    Flying Carbon Cub EX #11 since 2011

  2. #2
    Member
    Join Date
    Jul 2018
    Location
    Littleton, CO
    Posts
    39

    Default Re: Extra Leading edge skin?

    I have a skin that was pulled off because of a small dent.
    For fun I fixed it. It is hard to tell where the dent was.
    Send me your address and I will ship it to you.

  3. #3
    Senior Member chipallen's Avatar
    Join Date
    Jan 2010
    Location
    Marietta, GA
    Posts
    802

    Default Re: Extra Leading edge skin?

    For resale, I would suggest leaving the wing landing light as is and simply add LED landing lights on the main gear.

    Chip Allen

    SWT Aviation, Inc.
    Cubcrafters Southeast Sales Center
    Marietta, GA

  4. #4
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Extra Leading edge skin?

    Quote Originally Posted by stautz View Post
    I have a skin that was pulled off because of a small dent.
    For fun I fixed it. It is hard to tell where the dent was.
    Send me your address and I will ship it to you.

    I sent a PM. Thanks much.
    Flying Carbon Cub EX #11 since 2011

  5. #5
    Member
    Join Date
    Oct 2015
    Location
    Atlanta, GA
    Posts
    63

    Default Re: Extra Leading edge skin?

    Which landing light are you fixing to the gear? I’m interested in one as well.


    Sent from my iPhone using Tapatalk

  6. #6
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Extra Leading edge skin?

    Quote Originally Posted by Schwbo View Post
    Which landing light are you fixing to the gear? I’m interested in one as well.


    Sent from my iPhone using Tapatalk
    I haven't selected a unit yet. There are a lot available in 12 volts that are marketed for the truck and Jeep crowd.
    Flying Carbon Cub EX #11 since 2011

  7. #7
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Extra Leading edge skin?

    I am installing two LED lights on my EX now. This is the type I purchased https://www.bajadesigns.com/products...ight-Black.asp. They’re 2450 lumens each. I looked at a lot of lights before thinking this might be a good choice. I brought them up with a friend building an experimental Cub and he’d made the same choice a while ago. So that sealed the deal with me.

    They are a small fixture at 2”x3” and weigh just 8 ounces each. I am mounting them where the lift strut attaches to the wing using the AN5 bolts to hold the furnished brackets. The bolt has been reversed in the picture, ready to accept the SS bracket. I selected the Driving/Combo lenses which will give both good close and long distance illumination.

    0CA5B8BC-43E6-4C5D-A15C-CBA5E39F1305.jpg

    I’ll post pictures when I finish the installation. They’ll be wired into a Maxpulse wig wag controller too.
    Flying Carbon Cub EX #11 since 2011

  8. #8
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Extra Leading edge skin?

    I finished up the LED lights today. Everything working as it should. The Maxpulse controller works well and has a lot of options on flashing together or alternating at different rates.

    1859D984-FEFE-446C-92BA-A0F9C6C19EB8.jpg

    B4875E7E-2606-466A-A631-C18B2EF007D8.jpg

    CA809E7A-B5BE-47F0-BA78-5F05AA7FA342.jpg
    Flying Carbon Cub EX #11 since 2011

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •