Results 1 to 2 of 2

Thread: Seat Beat Floor Bolts Installation

  1. #1
    Senior Member
    Join Date
    Jul 2014
    Location
    NZAR
    Posts
    103

    Default Seat Beat Floor Bolts Installation

    Concerning the seat belt floor installation as referenced EX-2 Fuselage Manual Page 75. What bolts or screws are required to be installed on outer most side on both sides of the aft floor join. Photos on Page 75 seem outdated particularly #137 as gussets are different and seem to suggest the belts are attached more towards the centreline. Finish manual Page 47 FN9 provides no clarity. Can anyone please provide photos of correct installation of seat belt floor fitting, or clarify the instructions?

  2. #2
    Administrator Jon Delamarter's Avatar
    Join Date
    Feb 2013
    Location
    Yakima, WA
    Posts
    234

    Default Re: Seat Beat Floor Bolts Installation

    I think the bit that's perhaps throwing you off is that there are multiple gussets in that area. One is for the aft seat belt and the others are float fittings.

    Here, I have marked up FN9 from page 47 of the Finish Manual; the float fittings are red and the seatbelt attach point is in green.

    PLEASE NOTE: The floorboard has been removed for clarity. Also, the washers in the manual are improperly annotated as AN916-416; they should be AN960-416 as in the pic here. The floorboard will be between the washer and the fuselage gusset marked green.

    If you have more questions or need any further assistance, please drop an email to kitsupport@cubcrafters.com or call the new Kit Support HelpDesk line from 9-12 or 2-3:30 Pacific time.

    Kind regards,

    Aft Seat Belt Attach.png
    Jon Delamarter
    Customer Support Manager
    Cub Crafters, Inc.
    jond@cubcrafters.com
    Office (509)367-5200

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •