Does anyone have some detailed photos or drawings how the landing gear is covered down by the axle? I am not sure how to go around or over the braces.
Thanks
Landing Gear Cover
Does anyone have some detailed photos or drawings how the landing gear is covered down by the axle? I am not sure how to go around or over the braces.
Thanks
Re: Landing Gear Cover
I found that Mitch posted tip #3 in his area and has some pictures of the landing gear cover with the braided brake line.
Re: Landing Gear Cover
Not sure if these pictures help.IMG_8245.jpgIMG_8252.jpg
Last edited by TroyBranch; 04-01-2020 at 09:47 AM.
Re: Landing Gear Cover
Originally Posted by stautz
I have factory covered gear on my FX-3. The fabric on the inner face covers the plates that brace the axle attachment and is tight between inboard edges of those plates. The fabric forms a surface that is in a different plane from the rest of the gear leg covering. Sorry, checked my photos and don't have one that shows the detail of this area.
Reply With Quote
