Results 1 to 5 of 5

Thread: Discounted PPG Paint

  1. #1
    Member
    Join Date
    Jul 2018
    Location
    Littleton, CO
    Posts
    39

    Default Discounted PPG Paint

    Mitch (Cubcrafters) recomments using PPG DELTA DX1787 Etch Filler and DX1788 Catalyst over bare aluminum and carbon fiber. My local PPG dealer says that it has been discontinued and can't order any more.

    Has anyone else ran into this problem and if so what is the recommended alternative to prime bare aluminum and carbon fiber? (boot cowl, cowl, struts, cover plates, etc.)

  2. #2
    Senior Member
    Join Date
    Jul 2015
    Location
    Broken Arrow, OK
    Posts
    841

    Default Re: Discounted PPG Paint

    I get it from Mitch....

    Quote Originally Posted by stautz View Post
    Mitch (Cubcrafters) recomments using PPG DELTA DX1787 Etch Filler and DX1788 Catalyst over bare aluminum and carbon fiber. My local PPG dealer says that it has been discontinued and can't order any more.

    Has anyone else ran into this problem and if so what is the recommended alternative to prime bare aluminum and carbon fiber? (boot cowl, cowl, struts, cover plates, etc.)
    Dave Embry
    "You only live once.......but if you do it right.........once is enough."..

  3. #3
    Senior Member stede52's Avatar
    Join Date
    Nov 2013
    Location
    Carnation, WA
    Posts
    236

    Default Re: Discounted PPG Paint

    I also tried find that paint from every PPG dealer in Seattle and Washington and not one dealer I contacted carried it or could get it. I could only get it thru CubCrafters.
    Steve Dentz
    N419LD
    Carnation, WA

  4. #4
    Senior Member jmorrical's Avatar
    Join Date
    Aug 2014
    Location
    The Woodlands, TX
    Posts
    205

    Default Re: Discounted PPG Paint

    The first question on this thread has not been answered so I ask again.

    Apparently a PPG primer product Cubcrafters was using has been discontinued. PPG DELTA DX1787 Etch Filler and DX1788 Catalyst was used over bare aluminum and carbon fiber. My local PPG dealer confirms it is discontinued.

    Anyone know what the factory using or what are some of you using to prime these parts for paint?

    Are there any special precautions?

    Jim Morrical
    Jim Morrical

  5. #5
    Senior Member
    Join Date
    Jul 2015
    Location
    Broken Arrow, OK
    Posts
    841

    Default Re: Discounted PPG Paint

    http://forum.cubcrafters.com/showthr...ll=1#post25050

    Jim. I discussed it in the thread above. i was first told a few years ago to prime all carbon fiber and aluminum surfaces but was just told a few weeks ago by CC that they do not prime anything but aluminum now.

    Quote Originally Posted by jmorrical View Post
    The first question on this thread has not been answered so I ask again.

    Apparently a PPG primer product Cubcrafters was using has been discontinued. PPG DELTA DX1787 Etch Filler and DX1788 Catalyst was used over bare aluminum and carbon fiber. My local PPG dealer confirms it is discontinued.

    Anyone know what the factory using or what are some of you using to prime these parts for paint?

    Are there any special precautions?

    Jim Morrical
    Last edited by Daveembry; 10-02-2020 at 12:04 AM.
    Dave Embry
    "You only live once.......but if you do it right.........once is enough."..

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •