Wing Inspection Section 48 Page 182

[karaka29211]

On page 182 of the EX2 Wing manual, there is an inspection item at
1.31 Ensure that aileron cable depression is in proper location and at
proper depth.
This might be a case where there is no reference in the previous section, however, can somebody explain this item, what is aileron cable depression and where is the depth measured?

[Daveembry]

Yes, one of the things I warn of in my building thread is to ignore the inspection sheets pretty much because they are used for the factory order of the build and not the kits. You can refer to the items you were instructed to do during that section of the manual but if you see things on your inspection sheet that is not in that section of the manual, ignore them.

That depression is covered in the manual and refers to putting some pressure on the false spar with your hand/thumbs.....where the pulley bracket is to make a little more clearance room for the cable. It's in the manual but maybe just not in the section you are working on.

On page 182 of the EX2 Wing manual, there is an inspection item at
1.31 Ensure that aileron cable depression is in proper location and at
proper depth.
This might be a case where there is no reference in the previous section, however, can somebody explain this item, what is aileron cable depression and where is the depth measured?