Results 1 to 6 of 6

Thread: Tail Height Question on Amphibs

  1. #1
    Junior Member
    Join Date
    May 2019
    Location
    Fort Worth, TX
    Posts
    7

    Default Tail Height Question on Amphibs

    Does anyone know the height of the tail when a Carbon Cub is on Amphibs? I can't find it anywhere. Baumann, Aerocet, Clamar make a difference?

    Wondering if they will fit in my hangar.

    thanks,
    scott

  2. #2
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: Tail Height Question on Amphibs

    Bauman will be the shortest, Claymar the tallest of those you listed. Wipline would be taller than Claymar. Aerocet is probably in between Bauman and Claymar.

    Highest point is the top of the rudder.

    According to the CC18 Top Cub Flight Manual the Top Cub on Wipaire 2100A amphibs is 10' 6.5" to the top of the rudder. A Carbon Cub would be slightly under that on Wipline floats because there is no beacon light on top of the rudder.

    http://cubcrafters.com/c/wp-content/..._Statement.pdf

    According to the float supplement for the Light Sport Carbon Cub the top of the rudder is 117" (or 9' 9") when on Aerocet 2000 amphibs.

    http://cubcrafters.com/c/wp-content/..._Statement.pdf

    So you will likely be in between 9' 9" and 10' 6" I don't have the exact number handy for each float manufacturer. The angle of the ramp into the hangar can make a difference too as the top of the rudder is so far back, if there is several degrees of slope going into the hangar the tail is higher until all the wheels are in the hangar on the level surface.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  3. #3
    Junior Member
    Join Date
    May 2019
    Location
    Fort Worth, TX
    Posts
    7

    Lightbulb Re: Tail Height Question on Amphibs

    Thanks Pete, answers that question! My door is 12' h, but just aft of the door the ceiling is 14' so this works both ways!

    Appreciate it!

    scott

  4. #4
    Senior Member ATXCubDriver's Avatar
    Join Date
    Oct 2014
    Location
    Austin, TX
    Posts
    358

    Default Re: Tail Height Question on Amphibs

    Gunny I have a customer with Aerocet amphibs on a Carbon Cub SS in Ardmore and I can get you an exact measurement if you need more detail. Just let me know.

    Thanks
    Mike Sasser
    Boomerang Air
    mike@boomerangair.net

    OK,AR,TX,LA
    www.cubcrafters.com




  5. #5
    Junior Member
    Join Date
    May 2019
    Location
    Fort Worth, TX
    Posts
    7

    Default Re: Tail Height Question on Amphibs

    Quote Originally Posted by ATXCubDriver View Post
    Gunny I have a customer with Aerocet amphibs on a Carbon Cub SS in Ardmore and I can get you an exact measurement if you need more detail. Just let me know.

    Thanks

    Mike-

    Having that measurement would be good, if just to confirm what Pete has relayed.

    gunny
    we should talk soon...

  6. #6
    Senior Member ATXCubDriver's Avatar
    Join Date
    Oct 2014
    Location
    Austin, TX
    Posts
    358

    Default Re: Tail Height Question on Amphibs

    9' 3.5" sitting on level ground on Carbon Cub with Aerocet Amphibs.
    Mike Sasser
    Boomerang Air
    mike@boomerangair.net

    OK,AR,TX,LA
    www.cubcrafters.com




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •