Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: CubCrafters Ventral fin install

  1. #1
    Member GreggG's Avatar
    Join Date
    Feb 2014
    Location
    Minneapolis
    Posts
    50

    Default CubCrafters Ventral fin install

    Does anybody have any documentation or knowledge on how the ventral fin on the EX-3 is installed? Engineering drawing? Pictures? Ideally I would like to weld a tab on before cover. That area gets a lot of spray.

    Thanks,
    Gregg

    4AF01645-DF5E-4FF9-9988-9DCF8E0D6D49.jpeg
    Carbon Cub EX CCK-1865-0092

  2. #2
    Member
    Join Date
    Sep 2015
    Location
    Oxfordshire, UK
    Posts
    96

    Default Re: CubCrafters Ventral fin install

    It's in the EX dropbox folder under miscellaneous and Float Installation.pdf.
    I presume it won't have changed for the EX3.

  3. #3
    Member GreggG's Avatar
    Join Date
    Feb 2014
    Location
    Minneapolis
    Posts
    50

    Default Re: CubCrafters Ventral fin install

    Are you able to send me the Dropbox link for the EX? I only have the EX3 link and there isn’t a float manual in the misc. section.

    Thanks,
    Gregg
    Carbon Cub EX CCK-1865-0092

  4. #4
    Member
    Join Date
    Sep 2015
    Location
    Oxfordshire, UK
    Posts
    96

    Default Re: CubCrafters Ventral fin install

    I'll email you the PDF. I understand CC are not keen on sharing their dropbox links. Though I expect they would respond to your personal request.

  5. #5
    Member GreggG's Avatar
    Join Date
    Feb 2014
    Location
    Minneapolis
    Posts
    50

    Default Re: CubCrafters Ventral fin install

    Great. gregg dot guider at gmail. Thanks! I tried my old EX1 link and it didn’t work.
    Carbon Cub EX CCK-1865-0092

  6. #6
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: CubCrafters Ventral fin install

    No welding required, the ventral brackets are designed to bolt in to a covered airplane.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  7. #7
    Senior Member David H's Avatar
    Join Date
    Aug 2012
    Location
    Rochester, Michigan
    Posts
    188

    Default Re: CubCrafters Ventral fin install

    Pete,

    Is this fin needed on an EX2?

    I am planning for floats this fall and have seen CC cubs on floats with and without this ventral fin.
    I plan on Clamar 2180 amphibs, I am 1865lb EX2

    Thank you,

    David

  8. #8
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: CubCrafters Ventral fin install

    Double check the drawing package but I believe yes, the Claymar installation would require a ventral. There is different size/slightly different shape ventrals for CC11/Bauman, CC18/Wipline, CC19/wipline and the Claymar installations on EX/FX but the bracket installation is very similar and shares some parts between all of them.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  9. #9
    Member GreggG's Avatar
    Join Date
    Feb 2014
    Location
    Minneapolis
    Posts
    50

    Default Re: CubCrafters Ventral fin install

    Quote Originally Posted by Pete D View Post
    No welding required, the ventral brackets are designed to bolt in to a covered airplane.
    From this drawing it looks like you need at least an Adel clamp installed before cover. I was hoping to weld tabs like I did with the water rudder pulley attach points. Does the ventral fin interfere with the inspection panel?
    B2D3D83F-38A6-4D78-91BC-F8504364C506.jpg
    21799645-1BBA-4411-9AB5-69D7A84668FB.jpg
    Carbon Cub EX CCK-1865-0092

  10. #10
    Member GreggG's Avatar
    Join Date
    Feb 2014
    Location
    Minneapolis
    Posts
    50

    Default Re: CubCrafters Ventral fin install

    I ended up adding a tab to attach the forward bracket of my ventral fin to. I didn’t like the idea of cutting the fabric or having an adel clamp in a high abrasion area. Here is the result after green epoxy primer and rattle can black.
    E6008D2E-C59D-4667-AC08-46CF699A5FDA.jpg
    Carbon Cub EX CCK-1865-0092

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •