Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: CubCrafters Ventral fin install

  1. #11
    Junior Member
    Join Date
    Dec 2017
    Location
    Gansevoort, NY
    Posts
    25

    Default Re: CubCrafters Ventral fin install

    Quote Originally Posted by Pete D View Post
    Double check the drawing package but I believe yes, the Claymar installation would require a ventral. There is different size/slightly different shape ventrals for CC11/Bauman, CC18/Wipline, CC19/wipline and the Claymar installations on EX/FX but the bracket installation is very similar and shares some parts between all of them.
    Pete, you don't mention Aerocet's above - not applicable? I'm installing a set now on a new EX-2, and haven't seen mention of a ventral fin.

    Thanks,
    pb

  2. #12
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: CubCrafters Ventral fin install

    Quote Originally Posted by Pete Brown View Post
    Pete, you don't mention Aerocet's above - not applicable? I'm installing a set now on a new EX-2, and haven't seen mention of a ventral fin.

    Thanks,
    pb

    Check the drawing package or with Mitch. I can't recall off the top of my head if Aerocets need the ventral. If they are the 1500 Amphib they may not, they are much smaller floats than Claymars or Wipaire.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  3. #13
    Junior Member
    Join Date
    Dec 2017
    Location
    Gansevoort, NY
    Posts
    25

    Default Re: CubCrafters Ventral fin install

    Quote Originally Posted by Pete D View Post
    Check the drawing package or with Mitch. I can't recall off the top of my head if Aerocets need the ventral. If they are the 1500 Amphib they may not, they are much smaller floats than Claymars or Wipaire.
    Yup, 1500’s and nothing shown in the drawing list.

    Thanks!
    pb

  4. #14
    Senior Member
    Join Date
    Nov 2013
    Location
    Upstate NY
    Posts
    397

    Default Re: CubCrafters Ventral fin install

    Ventral fins are butt ugly and limit where you can beach your aircraft heel first. It's difficult enough without the fin to pull your tail in even on a beach with a steep bank, add shoreline brush and rocks and your never going to play or camp where you want with a bottom fin. I would check the flight stability before adding one

    Like this



    Glenn
    Last edited by Cubdriver2; 07-07-2019 at 06:47 PM.

  5. #15
    Senior Member Mark Keneston's Avatar
    Join Date
    Dec 2016
    Location
    Saratoga Springs, NY
    Posts
    463

    Default Re: CubCrafters Ventral fin install

    Guys Ventral fin on bottom of fuse was used on the Sport Cub CC11 with Baumans and is part of the drawing. There is none noted for the CC11-160 or CCK with 180HP on Aerocets. There is one however for the Top Cub, CCX EX/FX3 and the XCub with either Claymar or Whips. I have experience with all of these recently.

    The only potential issue Cubdrvr2 notes is beaching, and that only an issue if the terrain is tail high.

    Yankee1
    Cub Crafters
    Factory Direct New & Used Aircraft Sales
    NorthEast & Great Lakes Region
    518.410.9404

  6. #16
    Junior Member CandyBerger's Avatar
    Join Date
    Jul 2020
    Location
    Nurnberg,Germant
    Posts
    1

    Default Re: CubCrafters Ventral fin install

    also interested to hear the answer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •