Results 1 to 2 of 2

Thread: Tip Bow Trim

  1. #1
    Senior Member
    Join Date
    Jul 2014
    Location
    NZAR
    Posts
    103

    Default Tip Bow Trim

    On Page 163 of the wing manual there is an instruction to trim the Tip Bow per W53 which looks much the same as the diagram but not as depicted in Photo 248.
    Is it possible that the Tip Bow is now delivered from the factory in its final state and no longer requires trimming for any undisclosed reason?

    Secondly, there is an orange wire that runs the entire length of the wing labelled MB05B200 whose purpose is undetermined but could be a ground wire.

    There are no instructions referencing this wire, the only depiction appears in the revised page 135 in the un-captioned photo on the bottom right which seems to support the grounding purpose.

    There is of course a difference in the left wing wiring with the stall warning, but I am not sure this wire has that function.

    Any suggestions, or this another case of "the photos are not relevant".

  2. #2
    Senior Member
    Join Date
    Jan 2010
    Location
    Yakima, Washington
    Posts
    157

    Default Re: Tip Bow Trim

    You are correct, the tip bow is now trimmed from the factory.
    MB05B20O is for your stall warning horn.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •