Marson PR26A Hand Riveter or substitute
On Page 112 of the EX 2 Wing Manual, there is a suggestion that a Marson PR26A Hand Riveter will be required for use in tight spaces in wing construction. My online searching for such a tool, concludes it is no longer being offered for sale.
Has anyone found a link to a supplier or suitable alternative riveter?
Last edited by karaka29211; 04-29-2017 at 12:56 PM. Reason: Update on search
Re: Marson PR26A Hand Riveter or substitute
Karaka,
I could not locate a Marson puller as described in the manual. You will need to get in to tight spaces. There are some threads on the forum that address this.
My solution was to get a used professional model (Cherry Max 704B) on eBay with the offset puller head. It did the trick! This is a great tool and I used it for all the Cherry rivets as it allowed me to hold all the pieces being joined perfectly in place while the puller did the work.
IMG_0017.jpg
Last edited by David H; 04-29-2017 at 08:09 AM.
Re: Marson PR26A Hand Riveter or substitute
I have subsequently found that although Marson does not offer this product, there is an identical riveter named as the PSP 26A Hand Riveter available from Hanson Rivet in California.
Re: Marson PR26A Hand Riveter or substitute
I have one for sale here ;-)Originally Posted by karaka29211
http://www.ebay.com/itm/142363184257...84.m1555.l2649
Re: Marson PR26A Hand Riveter or substitute
Thanks, I have placed a bid.
Re: Marson PR26A Hand Riveter or substitute
Last edited by aeroaddict; 04-30-2017 at 06:02 AM.
Dan Arnold
KEUL
Re: Marson PR26A Hand Riveter or substitute
Did this tool from Hanson work to pull the cherry max rivets in machined trailing edge ribs?
thx PTB
Re: Marson PR26A Hand Riveter or substitute
Yes it does work in that area
Re: Marson PR26A Hand Riveter or substitute
Thank you.
Reply With Quote
