Results 1 to 3 of 3

Thread: Garmin G3X Engine Guages Sporadically Dissappeared

  1. #1
    Junior Member
    Join Date
    May 2016
    Location
    Acworth, GA
    Posts
    1

    Default Garmin G3X Engine Guages Sporadically Dissappeared

    So.... Any advice would be greatly appreciated.

    I hop in the plane and all of the sudden it doesn't have any tach, MP or oil pressure guages on the EFIS.
    they are just "gone"!!! Nobody has touched the airplane since the previous flight.

    Checked connections... Everything seems good!

    I would think there would be fields present but with red "X" across them if the engine monitoring hardware had malfunctioned ..... But in this instance the fields have completely Disappeared!

    i can't seem to restore the fields...

    Any thoughts?

    Thanks All!

  2. #2
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Re: Garmin G3X Engine Guages Sporadically Dissappeared

    If the gauges are gone with no red X that sounds like a configuration issue. Did anything else change? Is your com and transponder box still at the top? You might have to run configuration files again.

    When you first start the G3X out of the box it looks like the picture below. You have to run the CubCrafters configuration files to bring up the other fields. For some reason your system must have dumped them. That obviously shouldn't happen. That's my best guess but I am no expert!

    I would be making a call to CC in the morning. They can help you get it figured out.
    Attached Images Attached Images

  3. #3
    Senior Member ceslaw's Avatar
    Join Date
    Sep 2013
    Location
    Carterville, IL
    Posts
    593

    Default Re: Garmin G3X Engine Guages Sporadically Dissappeared

    Did the GEA circuit breaker pop?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •