[QUOTE=Smiddo;18201]I think it was both airspeed and altimeter was just to inconsistent.Originally Posted by TroyBranch
Sent from my iPhone using Tapatalk
Re: My EX2
[QUOTE=Smiddo;18201]I think it was both airspeed and altimeter was just to inconsistent.
Sent from my iPhone using Tapatalk
Re: My EX2
Engine looking good.
Sent from my iPhone using Tapatalk
Re: My EX2
I think there was some discussion on the difficulty of hooking up the trim spring onto the elevator so I will share my story. On the first try two of us struggled with the hook up for about three hours with no luck. It ended with a slip of a tool and a hole in the elevator. Yes I completely stripped recovered and panted the elevator. Not a happy day. The second try we suspended both elevators on some wires as shown in the photos, easily hooked up the spring then installed the pins. Entire process took 15 minutes. Happy day. Maybe this will help others.
Re: My EX2
Smiddo,
Thank you for the post and the picture.
I called Mitch yesterday on this exact issue. I had done a dry run on this as I set up my cables prior to covering the fuselage. He said to do exactly as you described.
Also remember you are to tuck the end of the spring loop back under itself to lock it in place. Yet another challenge.
David
Re: My EX2
Don't forget to put the hook under itself so it cant come off....that isn't easy either.
Re: My EX2
Latest update. Put the wings on.
Sent from my iPhone using Tapatalk
Re: My EX2
Very nice
That is a huge step forward.
looks really nice,,, good job !!! I really like the color. Do you use aerothane??
Latest update. Put the wings on.
Sent from my iPhone using Tapatalk[/QUOTE]
Re: My EX2
[/QUOTE]looks really nice,,, good job !!! I really like the color. Do you use aerothane??
Latest update. Put the wings on.
Sent from my iPhone using Tapatalk
Yes. Ranthane.
Sent from my iPad using Tapatalk
Re: My EX2
Project complete. Waiting for inspection.
. IMG_0019.jpgIMG_0014.jpgIMG_0015.jpg
Sent from my iPad using Tapatalk
Posting Permissions
Reply With Quote
