Page 1 of 5 12345 LastLast
Results 1 to 10 of 50

Thread: My EX2

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Apr 2015
    Location
    Lewistown, mt
    Posts
    33

    Default My EX2

    Here is an intro to my project. Just finished the silvers on the wing. When you spay that stuff on it is like talking to St. Peter at the pearly gates...it brings out all of your sins from days gone by. On a scale of 1 to 10 I would give myself a 6.75. It looks ok but don't get to close.

    .


    Sent from my iPhone using Tapatalk

  2. #2
    Senior Member ceslaw's Avatar
    Join Date
    Sep 2013
    Location
    Carterville, IL
    Posts
    593

    Default Re: My EX2

    Don't be too hard on your self! When you get the leading edge painted and move it out in the sun it will be 10 out of 10!

    Looks fine in the photo.

  3. #3
    Member Gary H's Avatar
    Join Date
    Nov 2013
    Location
    Othello, WA
    Posts
    50

    Default Re: My EX2

    All that really matters is the tapes are down. Sand in between coats. It'll be fine. Looking good!!

  4. #4
    Member
    Join Date
    Apr 2015
    Location
    Lewistown, mt
    Posts
    33

    Default My EX2

    Ya tapes went down fine and look good. It is the aileron cove that is kicking my but. Glued down the left wing yesterday and still was fighting to get it to lay down smooth. It is like bull riding... It looks a lot easier on TV. With the concave shape one can't simply iron things out.


    Sent from my iPad using Tapatalk
    Last edited by Smiddo; 03-29-2016 at 06:23 AM.

  5. #5
    Senior Member ceslaw's Avatar
    Join Date
    Sep 2013
    Location
    Carterville, IL
    Posts
    593

    Default Re: My EX2

    Quote Originally Posted by Smiddo View Post
    Ya tapes went down fine and look good. It is the aileron cove that is kicking my but. Glued down the left wing yesterday and still was fighting to get it to lay down smooth. It is like bull riding... It looks a lot easier on TV. With the concave shape one can't simply iron things out.


    Sent from my iPad using Tapatalk
    The aileron valley can be a challenge. Here are links to a couple of posts addressing that issue. Hope this doesn't come too late.

    Chuck

    http://www.cubcraftersforums.com/sho...ll=1#post12716

    http://www.cubcraftersforums.com/sho...ll=1#post13544

  6. #6
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: My EX2

    I wonder if that tape is the type used to cover the ends of the flaps and ailerons? It wasn't a part of my early kit but I think it was added at some point.

    After seeing it on a newer finished kit it looked like a good idea to me. It'll keep bugs and dirt from getting through those lightening holes. I found some of the tape and put it on my control surfaces.
    Flying Carbon Cub EX #11 since 2011

  7. #7
    Senior Member N867SP's Avatar
    Join Date
    Oct 2013
    Location
    Severna Park, MD
    Posts
    342

    Default Re: My EX2

    Quote Originally Posted by Dan L View Post
    I wonder if that tape is the type used to cover the ends of the flaps and ailerons? It wasn't a part of my early kit but I think it was added at some point.

    After seeing it on a newer finished kit it looked like a good idea to me. It'll keep bugs and dirt from getting through those lightening holes. I found some of the tape and put it on my control surfaces.
    Dan,

    The tape on over the lightening holes is just Home Depot Aviation Grade HVAC aluminum foil tape, applied prior to painting.


    Pete
    CCK-1865-0078
    ✈️N9PW
    Severna Park, MD
    Sent from my iPad using Tapatalk
    Pete
    ✈️CCK-1865-0078 N9PW
    Severna Park, MD W18

  8. #8
    Member
    Join Date
    Apr 2015
    Location
    Lewistown, mt
    Posts
    33

    Default Re: My EX2




    Sent from my iPhone using Tapatalk

  9. #9
    Member
    Join Date
    Apr 2015
    Location
    Lewistown, mt
    Posts
    33

    Default Re: My EX2

    Time to switch modes from low and slow to low and fast. Project is going on the back burner for a bit.


    Sent from my iPhone using Tapatalk

  10. #10
    Senior Member J2cub's Avatar
    Join Date
    Dec 2011
    Location
    St Louis, MO
    Posts
    276

    Default Re: My EX2

    Quote Originally Posted by Smiddo View Post
    Time to switch modes from low and slow to low and fast.
    That is looking really nice. Thanks for the tip for that strip on the River. We went up there and had a good time camping. The cabin was great to get out of the wind that came up in the afternoon. I should be coming to the Missouri Breaks flyin that Ralph helps put on. Do you think you will have her flying by then?
    Jeffery Baber
    Innovation Aircraft Sales
    (844) ACSALES

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •