Results 1 to 2 of 2

Thread: Jury Struts

  1. #1
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Jury Struts

    This might save someone a phone call. When I went to put my jury struts on today the manual states that two struts should be long and two short. All four of mine were the same length. After a quick call to Mitch he confirmed that now all jury struts are the same length. Just thought I would pass it along to save someone else the question.

    On another note, one thing I wish I would have done before hand is ream the lower strut attach holes before I put the landing gear on. I was able to ream the rear hole but not the front one. The landing gear was in the way. A 10 second job to get a bolt through a hole turned into 30 min job for each side!

    Mike

  2. #2
    Senior Member ceslaw's Avatar
    Join Date
    Sep 2013
    Location
    Carterville, IL
    Posts
    589

    Default Re: Jury Struts

    Thanks for the info on the jury struts. I am about there

    Agree on the landing gear bolts. Seems there was a bit of distortion, I assume from the fabric. Really took some force to get those bolts seated regardless of them being reamed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •