Highest time Carbon Cub

[Eddie Stash]

Just wondering who out there has the highest time CC? Mine has 108 hrs. Any problems to look for or maint issues?

[N867SP]

I've got 4.6hrs!


Pete
CCK-1865-0078
️N9PW
Severna Park, MD
Sent from my iPad using Tapatalk

[rv8pilotpaul]

I've got 55! Love every minute!

[tcwilliams]

Just wondering who out there has the highest time CC? Mine has 108 hrs. Any problems to look for or maint issues?

I had 300 plus hrs. on a 2012. My first build went in the air in March it has 210 hrs. and my second build has 40. Make sure you clean the breather tube, inside the exhaust, every oil change as it will plug up solid. Blew out a front seal on the first plane. I use a bore brush, .410 or .44 is about the right size. Enjoy!

[Scott c]

Agreed, good system with very little maintenance.

[Joseph206]

I have got 800 Hrs since 2012.
And it has been a B L A S T !!!!!!!!!!!!!!!!!!!!

[TroyBranch]

Got it. It connects direct to the exhaust and not dripping on it?. The coking makes sense then. It sounds like a good system, And cleaning is easy. Hope everyone knows to clean it.

[carlconti]

Got it. It connects direct to the exhaust and not dripping on it?. The coking makes sense then. It sounds like a good system, And cleaning is easy. Hope everyone knows to clean it.

What is the correct procedure?
Carl

[seastar]

What is the correct procedure?
Carl

Sounds like you should use a .44 caliber brush on a gun cleaning rod.
You can buy one at any sporting goods store or on Amazon.
Bill
I guess we need to get the carbon out of the CarbonCub.

[3phase]

What is the correct procedure?
Carl

Carl, check out Service Instruction 00023 (SI00023). Really good description with photos. I've been using a brass tube brush available in many different lengths and diameters from several industrial supply houses. If you google it you will find many sources. Sounds like the .44 cal gun brush works just fine also.