Has anyone else had the electric trim switch stick in the aft position (have to click forward to unstick it)? Any easy solution?
Jon
#293
Has anyone else had the electric trim switch stick in the aft position (have to click forward to unstick it)? Any easy solution?
Jon
#293
I used a little silicon spray. It helped but there is probably a better solution
Mine has stuck on occasion.
i don't have a solution.
seems to be a low quality switch.
CC needs to redesign.
bill
Occasionally I have run across one that sticks that has a small burr around the hole the black part of the switch sticks out of. You might check for that. I have had some success cleaning the burr off with a small xacto knife.
Otherwise the only other permanent solution is to R&R the stick. The knob/switch assembly is not replaceable independently of the stick as it is pressed in.
Is it in warranty still?
Pete Dougherty
Customer Support Manager
Cub Crafters Inc
It happened in my S2. IIRC a shpritz of WD40 fixed it.
Jeff Jacobs
Vancouver WA / KVUO
C-172N-180
My sticks occasionally as well.