Results 1 to 6 of 6

Thread: Autopilot servos

  1. #1
    Senior Member
    Join Date
    Feb 2010
    Location
    Indianapolis
    Posts
    283

    Question Autopilot servos

    I am curious about the mounting location of the autopilot servo motors?
    Where do they attach to the control cables?
    Are they out of sight or somewere in the cabin?
    Bill Rice
    SN 124

  2. #2
    Member Steve Hamblin's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    45

    Default Re: Autopilot servos

    Bill,

    This photo shows the pitch & roll servos...tucked away nicely under the seat base. Access is obtained by removing the access panel on the belly of the aircrafy-

    Steve

    DSCN0177.jpg
    Last edited by Steve Hamblin; 03-29-2010 at 09:21 AM.

  3. #3
    Senior Member
    Join Date
    Feb 2010
    Location
    Indianapolis
    Posts
    283

    Default Re: Autopilot servos

    Thanks Steve
    You answered my question but the link does not seem to work.
    Bill

  4. #4
    Member Steve Hamblin's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    45

    Default Re: Autopilot servos

    Bill,

    Let me know if that works now, I edited the original post-

    Steve

  5. #5
    Senior Member
    Join Date
    Feb 2010
    Location
    Indianapolis
    Posts
    283

    Default Re: Autopilot servos

    Thanks - that works
    I guess its looking up from underneath?
    Bill

  6. #6
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,178

    Default Re: Autopilot servos

    Yes, that is a view from underneath. The aluminum tube crossing the picture left to right is the torque tube. The front stick would be on the left end, the rear on the right end in this view.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •