GREAT video!! Thanks for sharing. And, ditto on mount details.
GREAT video!! Thanks for sharing. And, ditto on mount details.
Chip Allen
SWT Aviation, Inc.
Cubcrafters Southeast Sales Center
Marietta, GA
Some of the best I've seen. PLEASE detail that mount with photos. I am sick of jello. Ralph
Ralph Rogers
Owner: TheCubWorks
www.TheCubWorks.com
CCSS #142 N123MR
I have always felt the supercub is one thing mankind got right the first time but that there were better materials and methods to build them. CubCrafters products are proof I was right.
The prototyping process is not always pretty. I have gone through multiple generations of wing mounts to arrive at this point.
Important concepts to get to this point. The mount must be far enough forward to avoid getting the prop and wing leading edge in view with 127 degree field of view in the GoPro.
The mount has to be as rigid as possible. This mean the mount cannot have any secondary vibration induced by the airframe vibration. This proved to be the biggest problem. I found that certain engine RPM's would induce secondary vibrations in the camera mount when it was attached at a single point
And finally the camera must be isolated from direct vibration transmitted through the airframe.
I have fashioned a mount attached to the right tie down mount. The mount is currently stabilized by a brace and 3 safety wires. And finally the camera is isolated from the mount using Sorbothane.
This mount is not pretty but it seems to work. I will refine the mount in future versions.
Bob Anderson, CC11-00435, N94RA
Bob Anderson, CC11-00435, N94RA
Marketing (Jon Bliss) and I have been talking about that. Making a small kit for several camera locations would be easy for the E-LSA airplanes. I will run it by engineering, see what it would take to get it done so that S-LSAs can use them.
We are playing with several things but it is tough to find a good stable mount that gets solid video consistently, especially at higher power settings.
I am very interested in photos of and looking at any mounts that customers have had good luck with.
Pete Dougherty
Customer Support Manager
Cub Crafters Inc
Pete, I have been restricting my efforts to mounts which simply attach to existing structure. If a kit is considered by CubCrafters without this constraint more possibilities can be considered.
A camera pod built into the leading edge of the outboard wing (similar to landing light) would seem to be a good solution. Another solution would be a camera pod attached to the wing tip assuming that area is not subject to significant resonant vibration.
So long as the camera is isolated from a direct connection to the airframe, my experience is that resonant vibration in the mount is a much bigger problem than direct vibration induced in the airframe.
Bob Anderson, CC11-00435, N94RA
My next version is currently in flight tests. This mount uses the attach point for the stall warning switch. It is far enough out on the wing so that the prop is not visible when using the 170 degree FOV option on the GoPro 3. So far it is working great. No jello or vibration at any RPM setting. Of course it is carbon fiber.
Last edited by turbopilot; 06-25-2013 at 09:35 PM.
Bob Anderson, CC11-00435, N94RA
All as posted before, if you want an easy $100 solution ( a bit expensive but it simply works) and only a small jello at one rpm setting which you can see and avoid, order this mount from Nflight and the mounting spud screws right onto many end bolts of our Carbon Cubs so you can position the mounts ( I have 3) in many places and then just unclamp the GO PRO camera and quickly and easily move it to another location. Dont get me wrong here as sure do love all the engineering and thought being put into this but until then here is a solution and I am using it with excellent results. Best Gary
Nflight.jpg
Here also is their web site for the Go Pro mount http://nflightcam.com/store/index.ph...let-mount.html