Leading Edge Skin Clamps

[Mark Carey]

I could use them in Sacramento either before or after the guys in Santa Maria. Please advise when able.

Mark Carey

[N536cs]

Santa Maria is ready for a set of leading edge clamps.
If anyone has any they aren't using yet.....

THANKS!

[GreggG]

I’m ready for clamps if there’s a set available.

Thanks!
Gregg
612-865-5310 m

[Daveembry]

I built 4 new sets of clamps I can send out if you will email me your address. Mitch/CubCrafters cut out the outlines for the sides and shipped them to me and I purchased all the other wood and hardware and assembled them. I just ask to be reimbursed actual shipping costs to you + $10 for out of pocket costs for the hardware.

Again, I just ask on behalf of other builders that you only get the wing clamps after you have BOTH wings ready so as not to delay others who may be ready for them.

daveembry@aol.com

Thanks.

[Dewey]

I'm just about ready for leading edge clamps for my left wing.
my plan was to do the leading edges and also duplicate the clamps as a spare set to pass along.
any clamps out there available?
Dewey

[Daveembry]

Hi Dewey, Yes, just read the post below. Email me your address and I'll get a set out to you. daveembry@aol.com

I'm just about ready for leading edge clamps for my left wing.
my plan was to do the leading edges and also duplicate the clamps as a spare set to pass along.
any clamps out there available?
Dewey

[Daveembry]

OK. For the record, we have a set shipped off yesterday to you.

I'm just about ready for leading edge clamps for my left wing.
my plan was to do the leading edges and also duplicate the clamps as a spare set to pass along.
any clamps out there available?
Dewey

[Zach83]

Hello all, I am about ready for leading edge skins for both wings and wanted to see if anyone has a pair they could ship me. Please let me know, Zach

[N536cs]

Zach
We are done with our clamps
We are out of town this weekend but back on Monday
If you don’t have any by then. I will contact you


Sent from my iPhone using Tapatalk

[John Hodges]

Give me your shipping address, Zach. I'll get them out today.