Avery Tool update?

[c130jake]

Any word on the Avery tool package Mitch was working on? Working on the left wing this week.

Jake

[c130jake]

Avery sent me an email with the kit but alas I can't seem to post pics on my iPad. Looks like a great deal. Sorry about the formatting.

Jake


CUB CRAFTERS CARBON CUB TOOL KIT


9415 1-1/2” AVERY HAND RIVET SQUEEZER 7755 LONGERON SQUEEZER YOKE 14870 3/32 FEMALE X 3/8' DIA. DIMPLE DIE 14871 1/8 FEMALE X 3/8” DIA. DIMPLE DIE 3/32MALE 3/32 MALE DIE ONLY 1/8MALE 1/8 MALE DIE ONLY 1625 3/8” FLUSH SQUEEZER SET 1627 1/2” FLUSH SQUEEZER SET 1601 3/32” CUP SQUEEZER SET 1602 1/8 CUP SQUEEZER SET 4510 SMALL BLOCK FOR DIES 10 HOLE UBX502 3 PC UNIBIT SET 1051 #40 X 3/8” DIA C'SINK CUTTER 1052 #30 X 3/8” DIA C'SINK CUTTER 19365 C/S CAGE /NEEDLE BEARING 1046 SPEED DEBURR & C'SINK TOOL 7173-8 3 PC MIDWEST AVIATION SNIPS 15353 1/4” REAMER 15354 5/16” REAMER 15355 3/8” REAMER


4910 TORQUE WRENCH P26A TIGHT SPACE POP RIVET TOOL 7891 PNEUMATIC POP RIVET PULLER 6WR 6” REVERSING SAFETY WIRE TWISTER 19WA .032” SAFETY WIRE 1# 20WA .041 SAFETY WIRE 1# 1470 GENERAL DIGITAL CALIPER 8128 DIGITAL ANGLE PROTRACTOR 200 CLECO PLIERS 1016 3/32” CLECOS 10 PICES 1017 1/8” CLECOS 20 PICES 2019 3/16” CLECOS 10 PIECS 12X40 12”X #40 COBALT DRILL 12X30 12” X #30 COBALT DRILL 6X40 6X#40 COBALT DRILL 6X30 6# 30 COBALT DRILL 16401 1-60 DRILL SET 1101 #40 DRILL STOP 1102 #30 DRILL STOP


REGULAR CATALOG PRICE (if items purchased seperately) $ 1445.48 SPECIAL CARBON CUB KIT PRICE (when purchased as a kit) $ 1295.00 ORDER PART # KIT-120


We can customize your tool kit for you: Substitutions / Up-grades / Additions or (a few) Deletions are OK!! Call us!!


WWW.AVERYTOOLS.COM

[Mitch]

Here is the picture of the Carbon Cub EX tool Avery Kit.

Carbon Cub EX Tool Kit.jpg

[c130jake]

Well, I ordered the Avery kit minus a few things I already had. Saved about $200 and so far I am pleased with the tools. The close quarter pop rivet tool works well (I did grind just a tiny bit of the top of the nose to make sure the rivets on the ribs went in straight) The large yoke rivet squeezer was able to squeez all the drag blocks except the top two rivets by the pully bracket and the middle one on the lift strut on the front spar.

Only had to buck 3 rivets. May have to drill one out and redo it in the morning. (Dad's first time bucking rivets)
More work tomorrow.

Jake