Page 3 of 3 FirstFirst 123
Results 21 to 21 of 21

Thread: World's first 'Smoking Carbon Cub'

  1. #21
    Member jim plaster's Avatar
    Join Date
    Sep 2012
    Location
    winston-salem,n.c.
    Posts
    41

    Default Re: World's first 'Smoking Carbon Cub'

    I ran the hose inside of the void between the inner carbon panel and the outer fabric skin....they're are several areas along the stringer to secure the hose. I mounted my switch on the left side of the instrument panel where the throttle limitation placard was......I moved the throttle placard over beside the throttle. I haven't put a momentary " on" switch on the airplane as of yet....I simply turn the system on when needed and off when not. I suppose if one were to use the momentary switch...id put it on the stick below the ptt,or on /or near the throttle. Breakers are mounted to a small bracket....I used adel clamps to mount it to the diagonal tube behind the instrument panel where it's accessible. Haven't made it back out for pics yet..sorry
    Last edited by jim plaster; 04-16-2017 at 09:53 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •