Results 1 to 2 of 2

Thread: Red X across oil temp gauge

  1. #1
    Member armaurer's Avatar
    Join Date
    Sep 2011
    Sarasota, FL

    Default Red X across oil temp gauge

    Hello Everyone,
    Out Flying today...nice summer weather here in Sarasota...
    My oil temp gauge on G3X had a red X across it.
    This lasted a few minutes and all other engine parameters
    looked fine.
    Then it went back to a normal reading...
    Could the probe be loose?
    Any ideas??
    Alan Maurer
    Carbon Cub #183
    Sarasota, FL

  2. #2
    Senior Member Pete D's Avatar
    Join Date
    Jan 2010
    Yakima, WA

    Default Re: Red X across oil temp gauge

    A red x means that the G3X is not recieving information on that input. If its momentary like you describe, then comes online this might be normal at boot up but if during operation I would suspect a loose wire or faulty connection most likely at the sending unit end.

    Pete D

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts