Results 1 to 8 of 8

Thread: Cover for S2/ 3" gear

  1. #1
    Senior Member Springloaded's Avatar
    Join Date
    Jan 2011
    Location
    jupiter FL.
    Posts
    1,023

    Default Cover for S2/ 3" gear

    Trying to get a cover made for my plane Kennon covers thought a super cub cover will fit. Any body had one made.Where to get? Anybody put 3" extended gear on a S2 yet?
    Thanks
    Chuck

  2. #2
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: Cover for S2/ 3" gear

    Covers for a stock Super Cub should fit. The gear is pretty much the same dimensions.

    We have done one S2 with the 3x3 gear here at CC, don't know if anyone else has done one out in the field yet or not. I only had about 3 landings on it, but it seemed to work nice. Sure works nice on a Carbon Cub....

    Pete D.

  3. #3
    Senior Member chipallen's Avatar
    Join Date
    Jan 2010
    Location
    Marietta, GA
    Posts
    802

    Default Re: Cover for S2/ 3" gear

    Bruce's Custom Covers makes covers specifically for the CubCrafters Sport Cub S2, and Carbon Cub SS.

    Chip Allen

    SWT Aviation, Inc.
    Cubcrafters Southeast Sales Center
    Marietta, GA

  4. #4
    Senior Member Springloaded's Avatar
    Join Date
    Jan 2011
    Location
    jupiter FL.
    Posts
    1,023

    Default Re: Cover for S2/ 3" gear

    Chip
    Thanks I bought one for my PA11 at Kennon covers they did a really nice job,they just didnt sound positive about it fitting S2.I wil just order from Bruce.
    Pete
    It is my under standing that the gear on my S2 will fit on a PA11 (same as super cub) ,is that correct?A quick measurement looks like it will.I need new gear for my other cub.I was thinking I should get 3" extended for my S2 and puttting stock gear for my other cub.Just wandering if anybody had extended gear and there thoughts.

  5. #5
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: Cover for S2/ 3" gear

    The S2 gear would probably fit the other cub, but it would not be legal. The only way to do that would be if you had your PA11 in Experimental category. The S2 gear is built under ASTM rules, no PMA etc on it.

    Pete D.

  6. #6
    Senior Member Springloaded's Avatar
    Join Date
    Jan 2011
    Location
    jupiter FL.
    Posts
    1,023

    Default Re: Cover for S2/ 3" gear

    Pete
    Thanks, I new It would end up experimental if I go that route.
    Chuck

  7. #7
    Senior Member Centmont's Avatar
    Join Date
    Jan 2010
    Location
    Winifred, Montana
    Posts
    257

    Default Re: Cover for S2/ 3" gear

    I just got a Bruce's canopy cover for the CC11 ..... incredible fit!! Great worksmanship. Highest recommendation. R
    Ralph Rogers
    Owner: TheCubWorks
    www.TheCubWorks.com
    CCSS #142 N123MR
    I have always felt the supercub is one thing mankind got right the first time but that there were better materials and methods to build them. CubCrafters products are proof I was right.

  8. #8
    Senior Member Springloaded's Avatar
    Join Date
    Jan 2011
    Location
    jupiter FL.
    Posts
    1,023

    Default Re: Cover for S2/ 3" gear

    Thanks,Just tryed my PA11 cover just little short everywere Gonna order one from Bruces.
    Chuck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •