I thought some other builders might like to see some of the mods I've made to my kit.
Here is a tail cleanout/trim access panel held in place with three #85 Southco's and three formed 4130 clips riveted to the panel:
DSCN1497.jpg
An extended baggage. The white panels are .040" Kydex, door is .032" aluminum, floor is .040" aluminum. Five wing head #85 Southco's to retain the door. Total net weight gain is 7.0 pounds over the original extended baggage:
DSCN1503.jpg
DSCN1492.jpg
DSCN1490.jpg
DSCN1493.jpg
And I wanted a panel that was a little larger than the one furnished with the kit and without a center radio stack cutout.
DSCN1495.jpg
DSCN1500.jpg
DSCN1501.jpg
The empty panel weight with a partial backer stiffener is 1.50 pounds.