Results 1 to 5 of 5

Thread: STC's availlable for CC18-180/180A

  1. #1
    Member mspenc45's Avatar
    Join Date
    Feb 2010
    Location
    Pearce, AZ
    Posts
    32

    Default STC's availlable for CC18-180/180A

    A place to post new STC's for the Top Cub

    For Starters:

    New Electronic Engine gauges replace primary or as back up:

    http://www.forinstruments.com/store/...product_id=198

    Aspen's MFD series, page 8 of their STC approved models list

    http://www.aspenavionics.com/index.php/products/

  2. #2
    Junior Member aerospacelogic's Avatar
    Join Date
    Oct 2010
    Location
    Ontario, CANADA
    Posts
    1

    Default Re: STC's availlable for CC18-180/180A

    Just to add to the previous post, our primary website url is http://www.aerospacelogic.com/

    All products TSO'd and STC'd as primary replacements.

  3. #3
    Senior Member Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    931

    Default Re: STC's availlable for CC18-180/180A

    MaxPulse is STC'd for PA18-180 as well as the PA18-180A.

    Much easier installation than the old PulsLite system. Also, negligible weight gain.

    We've put a few of these in Carbon Cubs, they seem to work great.

    http://www.maxpulsemaxdim.com/maxpulseproduct.htm

    Pete D.
    Last edited by Pete D; 11-07-2010 at 11:25 AM.

  4. #4
    Junior Member johnmiller's Avatar
    Join Date
    Jan 2010
    Location
    Tacoma WA
    Posts
    5

    Default Re: STC's availlable for CC18-180/180A

    Hi Pete, I have N1858A/PA18A. Do you have an approximate cost for installation. It was fairly expensive last summer.

  5. #5
    Senior Member Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    931

    Default Re: STC's availlable for CC18-180/180A

    John,

    I think we can get them for somewhere around $300 but not sure what installation would entail on your aircraft. Maybe somewhere around a half a day? Give us a call and Stan or I can talk details.

    Pete D.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •