Results 1 to 2 of 2

Thread: Tie Downs

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Apr 2010
    Location
    Ortonville Michigan
    Posts
    19

    Default Tie Downs

    Randy

    We just had a few days of strong gusty winds in the North Country.
    What has Cubcrafters done to address the tie down areas of the wing to prevent damage to the wing? (Struts, spars) The winds seem to have damaged several PA-18 in the Palmer Wasilla area.

    Thanks again
    Mark

  2. #2
    Senior Member randylervold's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,378

    Default Re: Tie Downs

    Our wing tiedown rings are stainless steel and are attached right at the strut/spar intersection. That's one of the strongest areas on the aircraft. If you have wind strong enough to fail those rings then you probably have other parts of the aircraft that have already been ripped off.
    Randy Lervold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •