Results 1 to 4 of 4

Thread: AOSS and 3X3

  1. #1
    Junior Member
    Join Date
    Jun 2010
    Location
    Austin, Texas
    Posts
    5

    Default AOSS and 3X3

    I purchased Top Cub #46 that is on the line being built. I was hoping to get the 3X3 Gear and the AOSS on my plane, as I understand they are not approved for the TC yet. Any updates from you CC guys on these two mods? Sure would like to have them on from the Factory.

    Thanks,

    Cody

  2. #2
    Member Steve Hamblin's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    45

    Default Re: AOSS and 3X3

    3x3 Gear and AOSS are only available as Super Cub STC's and on our Light Sport aircraft.

    AOSS has been being talked about/in development for almost 3 years for the Top Cub. AOSS told me they hope to have that completed by the end of the year--I'm cautiously optimistic.

    3x3 Gear for the Top Cub will require testing that is scheduled to be completed by the end of this year. Realistically, after reports are written, drawings, POH, AMM, FAA approvals, this is likely to be ready sometime in late Q1 of 2011.

    Steve Hamblin

  3. #3
    Junior Member mryakima's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    5

    Default Re: AOSS and 3X3

    For the poorly informed like me, what is AOSS?

    Thanks,

    Scott
    Scott R a y
    Yakima, WA

    .............................


    The trouble with socialism is, sooner or later you run out of other people's money. Margaret Thatcher

  4. #4
    Member Steve Hamblin's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    45

    Default Re: AOSS and 3X3

    A suspension system-

    Good info here: http://www.aoss.net/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •