Results 1 to 4 of 4

Thread: Window support

  1. #1
    Junior Member
    Join Date
    Apr 2020
    Location
    Radord, Va
    Posts
    1

    Default Window support

    Has anyone successfully installed a gas strut/lid support to a cub window? To replace the cabinet latch hard mount? I have switched to ELSA from SLSA and would like to work a solution similar to what I see on Kitfox aircraft. Any advice would be appreciated. And no, Jon, I do not intend to use this modification to fly 100 mph with the window open. The latch attachment point on the starboard side is compromised and will have to be repaired.

  2. #2
    Senior Member
    Join Date
    Aug 2015
    Location
    Yakima, WA
    Posts
    302

    Default Re: Window support

    Yes, this has been done on Super Cub variants over the years. Here is a photo of one such installation. We have considered this feature ourselves but found that most view it as added weight and complexity with minimal return benefit. Simple and robust is usually the road we travel and a fixed uplock is rather simple.

    Is this a solution looking for a problem? The answer to that likely depends on personal mission desires.

    While you are tinkering, please keep in mind that your left side window is considered an emergency exit, should a bad day require it. Adding hardware in the cockpit area that could be a head contact hazard, reduce the effective egress area, or impede easy opening of the window in an emergency should be considered in your experimental design.

    window gas strut.jpg
    Last edited by Pat Horgan; 04-30-2020 at 08:56 AM.
    Patrick Horgan
    President
    CubCrafters | Yakima WA

  3. #3
    Junior Member
    Join Date
    Jun 2020
    Location
    Kharkiv, Ukraine
    Posts
    7

    Default Re: Window support

    I think it's a very effective solution. The main thing is that the gas support is of appropriate strength, so that the closure is soft

  4. #4
    Junior Member
    Join Date
    Sep 2020
    Location
    Mariupol
    Posts
    9

    Default Re: Window support

    I wonder what kind of gas rack is used, how hard the opening and closing is.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •