Results 1 to 4 of 4

Thread: Landing Gear Cover

  1. #1
    Member
    Join Date
    Jul 2018
    Location
    Littleton, CO
    Posts
    39

    Default Landing Gear Cover

    Does anyone have some detailed photos or drawings how the landing gear is covered down by the axle? I am not sure how to go around or over the braces.
    Thanks

  2. #2
    Member
    Join Date
    Jul 2018
    Location
    Littleton, CO
    Posts
    39

    Default Re: Landing Gear Cover

    I found that Mitch posted tip #3 in his area and has some pictures of the landing gear cover with the braided brake line.

  3. #3
    Senior Member TroyBranch's Avatar
    Join Date
    May 2015
    Location
    Calgary Alberta Canada
    Posts
    313

    Default Re: Landing Gear Cover

    Not sure if these pictures help.IMG_8245.jpgIMG_8252.jpg
    Last edited by TroyBranch; 04-01-2020 at 08:47 AM.

  4. #4
    Senior Member Andy's Avatar
    Join Date
    Dec 2019
    Location
    Glendale, AZ
    Posts
    714

    Default Re: Landing Gear Cover

    Quote Originally Posted by stautz View Post
    Does anyone have some detailed photos or drawings how the landing gear is covered down by the axle? I am not sure how to go around or over the braces.
    Thanks

    I have factory covered gear on my FX-3. The fabric on the inner face covers the plates that brace the axle attachment and is tight between inboard edges of those plates. The fabric forms a surface that is in a different plane from the rest of the gear leg covering. Sorry, checked my photos and don't have one that shows the detail of this area.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •