Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: EX-2 Oil temps

  1. #1
    Senior Member 40m's Avatar
    Join Date
    Sep 2013
    Location
    Shoreham, VT
    Posts
    394

    Default EX-2 Oil temps

    Currently at 13 hours and see oil temps range between 157-175, what are others seeing as normal operating oil temp?
    Recommendations to increase and to what range.

    40M

  2. #2
    Senior Member
    Join Date
    Jul 2015
    Location
    Broken Arrow, OK
    Posts
    841

    Default Re: EX-2 Oil temps

    Check out post #139 here http://forum.cubcrafters.com/showthr...mp-Hints/page2

    I think you should try and get temps up around the 180 mark to evaporate off moisture in the oil. I heard that sometimes the location of the probe made a difference in the temps you would see but not sure.

    On mine and others CC340’s, I think everyone was taping off a big portion of the oil cooler trying to get temps up. You can read how the vernatherm works in that post. If yours is varying temps like my CC363i was, it could be for the same reason.

    Quote Originally Posted by 40m View Post
    Currently at 13 hours and see oil temps range between 157-175, what are others seeing as normal operating oil temp?
    Recommendations to increase and to what range.

    40M
    Last edited by Daveembry; 06-21-2019 at 10:36 AM.
    Dave Embry
    "You only live once.......but if you do it right.........once is enough."..

  3. #3
    Senior Member TroyBranch's Avatar
    Join Date
    May 2015
    Location
    Calgary Alberta Canada
    Posts
    313

    Default Re: EX-2 Oil temps

    Yes keep the temps above 180. I generally keep my range 180-200 and adjust the amount of foil tape on the cooler, more or less, to stay within that. This gives some flexibility. Power setting greatly change the oil temp. If you put to much tape on by mistake you can power back to 2100 and you will be amazed at how much heat is reduced. Land take off more tape. Soon you will know what you need for tape based on OAT. I change in the fall and spring. In winter I have tapped the full oil cooler and cowl inlet and just make 180 on a really cold day. I consider -20c cold for reference.

  4. #4
    Member
    Join Date
    Sep 2015
    Location
    Oxfordshire, UK
    Posts
    96

    Default Re: EX-2 Oil temps

    Mine was staying around 150, even with warmer weather. So I've taped over part of the oil cooler using foil tape (as used for sealing HVAC ducts and available easily).

    You can actually reach in through the cowl inlet to apply the tape with care.

    Reading some earlier posts, it seems low oil temperatures are quite common

  5. #5
    Senior Member stede52's Avatar
    Join Date
    Nov 2013
    Location
    Carnation, WA
    Posts
    236

    Default Re: EX-2 Oil temps

    Here is something I build to eliminate the need for tape, an adjustable flap for the backside of the oil cooler, works great. Since I took these pics I've changed out the friction cable to a button lock cable because the airflow was pushing open the flapper.
    Attached Images Attached Images
    Steve Dentz
    N419LD
    Carnation, WA

  6. #6
    Member
    Join Date
    Feb 2013
    Location
    Sisters, OR
    Posts
    30

    Default Re: EX-2 Oil temps

    Steve -

    I have a very similar set-up on my EX. I thought that I would need to block it from the front, but it works great from the rear, and the installation is much simpler.
    Last edited by mikemacon; 06-21-2019 at 05:59 PM.

  7. #7
    Senior Member
    Join Date
    May 2014
    Location
    United States
    Posts
    132

    Default Re: EX-2 Oil temps

    Quote Originally Posted by stede52 View Post
    Here is something I build to eliminate the need for tape, an adjustable flap for the backside of the oil cooler, works great. Since I took these pics I've changed out the friction cable to a button lock cable because the airflow was pushing open the flapper.
    Where did you buy the button lock cable

  8. #8
    Senior Member stede52's Avatar
    Join Date
    Nov 2013
    Location
    Carnation, WA
    Posts
    236

    Default Re: EX-2 Oil temps

    Quote Originally Posted by lbell View Post
    Where did you buy the button lock cable
    Other then the aluminum flapper, here is the parts list:

    https://www.aircraftspruce.com/catalog/appages/a700.php - A-700 72" BLACK DASH CONTROL PN 05-13172

    https://www.aircraftspruce.com/catalog/appages/bowdenclamp.php
    - Bowden Cable Clamp for 7/32" Bowden Cable PN 05-03287

    https://www.aircraftspruce.com/catalog/appages/wireswivels.php
    -AZUSA WIRE SWIVELS 2361 or something similar

    https://www.aircraftspruce.com/catalog/mepages/pianohinge.php?clickkey=14683
    - Aluminum hinge PN MS20257C1-3 03-00056-3 3/4"
    Steve Dentz
    N419LD
    Carnation, WA

  9. #9
    Senior Member
    Join Date
    May 2014
    Location
    United States
    Posts
    132

    Default Re: EX-2 Oil temps

    Quote Originally Posted by stede52 View Post
    Other then the aluminum flapper, here is the parts list:

    https://www.aircraftspruce.com/catalog/appages/a700.php - A-700 72" BLACK DASH CONTROL PN 05-13172

    https://www.aircraftspruce.com/catalog/appages/bowdenclamp.php
    - Bowden Cable Clamp for 7/32" Bowden Cable PN 05-03287

    https://www.aircraftspruce.com/catalog/appages/wireswivels.php
    -AZUSA WIRE SWIVELS 2361 or something similar

    https://www.aircraftspruce.com/catalog/mepages/pianohinge.php?clickkey=14683
    - Aluminum hinge PN MS20257C1-3 03-00056-3 3/4"
    Thanks

  10. #10
    Junior Member
    Join Date
    Dec 2017
    Location
    Gansevoort, NY
    Posts
    25

    Default Re: EX-2 Oil temps

    Nice job Steve.

    Glenn we could add that pretty easily. I should check with Bruce on his too.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •