2018 EX3 For Sale

[Daveembry]

BRAND NEW Carbon Cub EX3, Serial number 0002. I have another EX3 about finished and need the hangar space! daveembry@aol.com.

I have about 65 total hours on it so only abut 25 hours after the 40 hour “fly off” period for the FAA certification.

This is the very first of the new EX-3 Carbon Cubs. Read more details below the photos.

A107D308-9B7A-436E-82CA-C356C3588D28.jpg


A89859ED-2489-48E5-BF1E-B7E28CAC97CB.jpg


0F6DFC3D-ED76-4536-B77A-70A5765DD4AF.jpg


63AA895A-6A24-4AD8-ABEE-893D486E18A5.jpg


EAE06F1E-2EAE-4837-B0DE-2E0284825134.jpg
Note that the inspection cover is off in this photo and I have also added gap seals to the tail feathers now as well.


ECF5D8C4-4DE4-490A-A170-2860C1E1CFB8.jpg


C0640291-F03F-4D00-A6B2-0FE9D4F90136.jpg
See the header panels and instrument panels I hydro dipped in the carbon fiber look as well to match the rest of the interior.


A38BFDD1-2A86-445D-BA53-52DEE21CAFC9.jpg


E2D36247-A127-4B60-AF06-9D00976DFA4F.jpg


881FC214-46C2-4948-ACD2-96E998B44EBE.jpg


4A3F7455-AFAD-4BAC-B5BB-9FD27D984C93.jpg


82483547-E290-423B-B6E9-2AFEFC3D469A.jpg


This new model included numerous upgrades over the original EX version with the biggest change being the new G-Series control surfaces (ailerons; tail feathers and flaps).

The flap are true slotted flaps. The G-Series makes positive controllability of the aircraft at unbelievable low airspeeds.
You can read more about these at http://cubcrafters.com/…/…/g-series-...ailerons-faqs/

To see illustrations of all the improvements of the EX3 over the EX2, go to this page http://cubcrafters.com/3.

Some of the changes from the EX2 to this EX3 are:
• Hartzell Constant Speed prop. 80”
• New CC363i Fuel Injected engine developed just for CubCrafters. About 186 hp nominal. Check out all the details at this link http://cubcrafters.com/c/2017/11/cub...i-power-plant/
• Rear seat heat and defrost added using new style heat muffs (lots of heat) and new NACA duct for more forced air, giving a 300% increase over EX2’s.
• Take-off distance is 20’ SHORTER than the EX2 even though the empty weight is higher
• New “fighter style” front stick with built in push to talk; electric trim and autopilot disconnect and control wheel steering for autopilot.
• Stronger fuselage with 9 added cross members.

Most every option and upgrade as been put into this special one-of-a-kind Carbon Cub.

2000 lb Gross Weight. Empty Weight 1152 lbs giving about 848 lb useful load.

PUBLISHED PERFORMANCE
• 135 mph cruise @ 75% power
• Range 765 miles
• Take Off distance 90 feet
• Landing Distance 155 feet
• Rate of Climb 2,400 fpm


EXECUTIVE GLASS PANEL includes:
o Garmin G3X Touch (10.6” display) with AOA (Angle of Attack) pitot and indicators (both audio and visual AOA); Synthetic Vision; stereo “3D”intercom; audio and video inputs; XM weather and traffic; ESP; CONNEXT; integration with autopilot; transponder and com radio. More at http://www.garmin.com/…/…/intheair/s...ion/g3x-touch/
o Garmin GTX345R. Mode S transponder (remote mount) with ADS-B IN & OUT.
o Garmin 307 Autopilot. The autopilot is completely controllable through the G3X Touch but I also installed the head so you can use it separately if desired.
o Garmin GTR 200 Com Radio. Also completely controlled via the G3X Touch or directly by the head. Built in intercom.
o OAT temperature Probe.
o Electric Trim position sensor.
o Full EIS package including ADAHRS and 4 cylinder CHT and EGT sensors; fuel flow meter; “Lean Assist” on G3X Touch.
o Bluetooth operation linking to ipads, smart phones, etc.

o Instrument Panel as well as the door header panels hydro dipped with Titanium Carbon Fiber look.

EXTENDED BAGGAGE area and door.
o Carbon fiber door on fuselage. The extended baggage area allows up to 100 lbs in the forward and 60 lbs in the rear baggage area.
o Floor and walls fully carpeted. CubCrafters factory carpet package in baggage area with extra tie-down hooks installed in the baggage area.

- EXTENDED FUEL TANKS. 44 gallons (39 Useable).
- 31” Alaska Bushwheel Tundra Tires
- 3200 “Baby Bushwheel” steerable tailwheel.
- 3x3 Extended Landing gear option – Uncovered with Stainless Steel Brake Lines
- New Acme Gen3 shock system (by far the leading in the industry).
- 1.75” Heavy Duty Brakes with Stainless Steel brake lines
- LED lighting package.
o Navigation Lights
o Right AND Left wing landing lights with WIG-WAG function
o Strobe lights
o Cockpit LED lighting.
- ELT (406). Kannad
- Wing Vortex Generators
- Gap Seals (rear control gaps on tail feathers)
- Auxiliary Power Plug.
- 2 Headset Hooks
- Bose headset connectors (built in power and audio)
- Front & Rear seat trim controls. Electric trim with controls front and rear.
- Oregon Aero front and rear seats.
- 3 web pockets added to interior
- 2 extra snap vents added on side window along with the 2 standard ones in the skylight.
- Carbon Fiber used extensively throughout including interior panels; cowl, cowl flaps, prop spinner; floorboard; seat base; wingtips and much more.

CC-363i 186 HP FUEL INJECTED ENGINE http://cubcrafters.com/c/2017/11/cub...i-power-plant/
o Dual Lightspeed Electronic Ignition
o Lightweight starter and alternator
o Lightweight custom oil sump
o Lightweight custom intake
o Lightweight custom exhaust system
o Hartzell Constant Speed Composite prop.