Results 1 to 5 of 5

Thread: Flap handle question

  1. #1
    Junior Member
    Join Date
    Jul 2015
    Location
    Lexington, KY
    Posts
    14

    Default Flap handle question

    Anyone have a schematic or other detail on the handle trigger mechanism? Landed yesterday handle working fine, went to set to first notch for a touch and go and wouldn’t catch. Will not catch unless pushing up on trigger. Thanks for feedback.

  2. #2
    Senior Member ATXCubDriver's Avatar
    Join Date
    Oct 2014
    Location
    Austin, TX
    Posts
    358

    Default Re: Flap handle question

    Try using some lubricant on the trigger pivot and the linkage. I've had this happen before and it was just a friction issue.



    Quote Originally Posted by Megs4sale View Post
    Anyone have a schematic or other detail on the handle trigger mechanism? Landed yesterday handle working fine, went to set to first notch for a touch and go and wouldn’t catch. Will not catch unless pushing up on trigger. Thanks for feedback.
    Mike Sasser
    Boomerang Air
    mike@boomerangair.net

    OK,AR,TX,LA
    www.cubcrafters.com




  3. #3
    Senior Member
    Join Date
    Jul 2015
    Location
    Broken Arrow, OK
    Posts
    841

    Default Re: Flap handle question

    What Mike said!! If not, I have attached the "Assemblies Manual" and the flap handle info starts on page 7 just in case you need it.

    Quote Originally Posted by Megs4sale View Post
    Anyone have a schematic or other detail on the handle trigger mechanism? Landed yesterday handle working fine, went to set to first notch for a touch and go and wouldn’t catch. Will not catch unless pushing up on trigger. Thanks for feedback.
    Attached Files Attached Files
    Dave Embry
    "You only live once.......but if you do it right.........once is enough."..

  4. #4
    Junior Member
    Join Date
    Jul 2015
    Location
    Lexington, KY
    Posts
    14

    Default Re: Flap handle question

    Used LPS2 yesterday and today works fine. Still want to go thru it so will use the docs sent. Thanks for the replies!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •